Illustration 1 | g01856874 |
(X) Guide studs
(Y) Short fastener |
Tighten the fasteners in the sequence that is shown in illustration 1. Torque for the fasteners ...
Illustration 2 | g01857014 |
Remove the guide studs. Install the fasteners (27), (28), (29) and (30).
Tighten the fastener in the sequence that is shown in illustration 2. Torque for the fasteners ...
Tighten the oil drain plug to the following torque. ...
Tighten the oil level switch (if equipped) to the following torque. ...
Refer to the Disassembly and Assembly, "Engine Oil Pan" for the correct procedure to install the engine oil pan.
Illustration 3 | g01397669 |
Tightening sequence |
Tighten the fasteners in the sequence that is shown in illustration 3 to the following torque. ...
Tighten the oil drain plug to the following torque. ...
Tighten the oil level switch (if equipped) to the following torque. ...