Water Pump - Remove and Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 129-1948 | Water and Temperature Resistant Grease | 1 |
- Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
Show/hide table
Illustration 1 g02175361 - Disconnect tube assembly (1).
- Remove bolts (2) and temperature regulator housing (3).
- Remove tube (4).
Show/hide table
Illustration 2 g01868394 - Disconnect tube assembly (6).
- Remove bolts (5) and elbow (7).
Show/hide table
Illustration 3 g01868396 - Loosen clamp (8).
- Remove bolts (10), elbow (9), and the hose.
Show/hide table
Illustration 4 g01868395 - Remove bolts (12) and water pump (11).
Show/hide table
Illustration 5 g01868397 - Remove O-ring seal (13) from water pump (11).
Show/hide table
Illustration 6 g01868453 - Remove seal (16).
- Remove bolts (14) and inlet cover (15).
Show/hide table
Illustration 7 g01868454 - Remove O-ring seal (16) from inlet cover (15).
- Install water pump (11) in the reverse order of removal.
- Apply Tooling (A) to all O-rings and seals in the installation procedure.
- Install clamp (8) and tighten clamp (8) to a torque of
14 ± 1 N·m (124 ± 9 lb in) .
Caterpillar Information System:
2009/03/01 An Improved Cylinder Pack Is Now Available for 3406E, C15 and C-15 On-Highway Truck Engines with High Load Applications {1225, 1239}
C13 Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
Replacement Tube Assembly{1261, 1274} Replacement Tube Assembly{1261, 1274}
C13 Engines for Caterpillar Built Machines Electronic Unit Injector - Remove and Install
Replacement Tube Assembly{1261, 1274} Replacement Tube Assembly{1261, 1274}
C6.6 Industrial Engine Speed/Timing Sensor
C7.1 Engines for Caterpillar Built Machines Engine Oil Cooler
2009/07/06 New Main Control Valves are Now Available {5051}
795F AC and 795F AC XQ Off-Highway Trucks Welding on Electric Drive Machines
An Additional Fuel Filter is Available for Certain C4.4 and C6.6 Engines{1261} An Additional Fuel Filter is Available for Certain C4.4 and C6.6 Engines{1261}
G3500B Engines Air Lines
G3500B Engines Air Lines
C13 Engine for Caterpillar Built Machines Engine Oil Pump - Remove and Install
C6.6 Industrial Engine Engine Oil Pan
2009/03/23 Setting the Trip Point for High Boost Pressure {1901, 1920}
725C2, 730C2 Articulated Truck LRC Engine Supplement Engine Oil Pump - Disassemble
725C2, 730C2 Articulated Truck LRC Engine Supplement Engine Oil Pump - Assemble
2009/05/11 A New Gasket Improves the Sealing between the Exhaust Manifold and the Cylinder Head on Some 3500 Machine Engines {1100}
Storage Procedure for Caterpillar Products {0355, 1000, 7000} Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Using the Air Compressor Unloader Kit for On-Highway Engines{1803} Using the Air Compressor Unloader Kit for On-Highway Engines{1803}
G3500 Generator Sets Crankshaft Vibration Damper - Inspect - 1500 RPM G3520 engines (if equipped with an oil fed damper)
C175-16 Locomotive Engine Engine Misfires, Runs Rough or Is Unstable
C13 Engine for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove and Install