325D and 329D Excavators and 325D Material Handler Machine System Specifications Caterpillar


Pilot Valve (Joystick)

Usage:

325D L A3R



图 1g01573873

注: 在控制杆和特种螺母之间涂抹 154-9731 螺纹固定剂 。

(1) 专用螺母的扭矩 ... 68.6 ± 4.9 N·m (50 ± 4 lb ft)

(2) 垫片的扭矩 ... 68.6 ± 4.9 N·m (50 ± 4 lb ft)

(3) 接头的扭矩 ... 47.1 ± 2.9 N·m (35 ± 2 lb ft)

(4) 118-4087 弹簧

数量 ... 4
自由长度 ... 10.6 mm (0.42 in)
外径 ... 5.5 mm (0.22 in)

(5) 165-9442 弹簧

数量 ... 2
自由长度 ... 29.7 mm (1.17 in)
外径 ... 8.8 mm (0.35 in)

(6) 165-9460 弹簧

数量 ... 2
自由长度 ... 31.1 mm (1.22 in)
外径 ... 8.6 mm (0.34 in)

(7) 270-5953 弹簧

数量 ... 4
自由长度 ... 41.9 mm (1.65 in)
外径 ... 15 mm (0.6 in)

(8) 根据需要,使用 099-6137 垫圈 :

数量 ... 4
1 个 1 号垫圈的厚度 ... 0.2 mm (0.01 in)
1 个 2 号垫圈的厚度 ... 0.4 mm (0.02 in)

Caterpillar Information System:

C27 and C32 Industrial and Petroleum Engines Turbocharger
C18 Petroleum Generator Sets Safety Messages
C15 and C18 Petroleum Generator Sets Safety Messages
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Ether Starting Aid - Test
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263} Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
2007/10/22 Use Care During Disassembly of the Fuel Manifolds {1252, 1274}
2007/10/22 Use Care During Disassembly of the Fuel Manifolds {1252, 1274}
Replace Exciter Rotor on LC6 Frame Generators{4457} Replace Exciter Rotor on LC6 Frame Generators{4457}
2008/04/14 A New Aftercooler is Now Used {1063}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133} Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
3608 Engine Barring Group - Remove and Install
2007/11/05 Replacement of the Priming Pump {1258, 1263}
C32 Marine Auxiliary Engine Refill Capacities and Recommendations
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091} Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
2007/10/22 The Interface Between the Transmission and the Engine Has Been Improved and Is Now Used {1157}
3516B Engine for 994F and 994H Wheel Loaders ECM Does Not Communicate with Other Modules
3516B Engine for 994F and 994H Wheel Loaders Engine Cranks but Does Not Start
2007/10/22 The 6V-6146 Load Leveler Handles Large Components Up To 4500 kg (10,000 lb) {0632, 0635, 1000, 7000}
2007/11/05 Replacement of the Priming Pump {1258}
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Gauges and Indicators
3508B, 3512B, 3516B, 3512C and and 3516C Auxiliary Engines, Generator Set Engines, and Generator Sets Gauges and Indicators
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Engine Rating Definitions
G3520B Engine Product Lifting
C4.4 Industrial Engine Exhaust Manifold - Inspect
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.