Turbocharger
Show/hide table
| |
| Illustration 1 | g02578076 |
Show/hide table
| Specification for 287-7210 Turbocharger Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 7W-2297 Clamp As | Use the following procedure to tighten the clamp assemblies for the turbocharger:
1. Tighten to 2. Lightly tap around the clamp assemblies with a soft faced hammer. 3. Again, tighten to |
| 2 | 1 | 9N-2038 Turbine Clamp As | |
| 3 | 4 | 8M-2296 Full Nut | Before assembly, apply 4C-5599 Anti-Seize Compound to the threads and the bearing surface of the full nuts that are used to mount the turbocharger.
Torque to |
Caterpillar Information System:
C18 Petroleum Generator Sets Safety Messages
C15 and C18 Petroleum Generator Sets Safety Messages
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Ether Starting Aid - Test
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263} Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
2007/10/22 Use Care During Disassembly of the Fuel Manifolds {1252, 1274}
2007/10/22 Use Care During Disassembly of the Fuel Manifolds {1252, 1274}
Replace Exciter Rotor on LC6 Frame Generators{4457} Replace Exciter Rotor on LC6 Frame Generators{4457}
2008/04/14 A New Aftercooler is Now Used {1063}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133} Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
3608 Engine Barring Group - Remove and Install
2007/11/05 Replacement of the Priming Pump {1258, 1263}
3608 Engine Air Starting Motor - Install
325D and 329D Excavators and 325D Material Handler Machine System Specifications Pilot Valve (Joystick)
C32 Marine Auxiliary Engine Refill Capacities and Recommendations
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091} Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
2007/10/22 The Interface Between the Transmission and the Engine Has Been Improved and Is Now Used {1157}
3516B Engine for 994F and 994H Wheel Loaders ECM Does Not Communicate with Other Modules
3516B Engine for 994F and 994H Wheel Loaders Engine Cranks but Does Not Start
2007/10/22 The 6V-6146 Load Leveler Handles Large Components Up To 4500 kg (10,000 lb) {0632, 0635, 1000, 7000}
2007/11/05 Replacement of the Priming Pump {1258}
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Gauges and Indicators
3508B, 3512B, 3516B, 3512C and and 3516C Auxiliary Engines, Generator Set Engines, and Generator Sets Gauges and Indicators
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Engine Rating Definitions
G3520B Engine Product Lifting