Crankshaft Rear Seal - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 5B-4274 | 螺栓 | 3 |
| B | 8T-0914 (1) | 导向销 | 2 |
Show/hide table
| ( 1 ) | 9U-5105 发动机工具总成 中的零件 |
开始:
- 拆下飞轮。 请参阅拆解和组装, "飞轮和齿圈 - 拆卸和安装"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 拆下将曲轴后油封和接头 (1) 固定入位的螺栓 (2) 。
Show/hide table
 | |
| 图 1 | g01294474 |
注: 拆卸曲轴后油封时不需要卸下接头 (4) 。
- 将工具 (A) 安装到接头 (1) 中。 用力均匀地拧紧工具 (A) 。 将曲轴后油封和接头 (1) 从飞轮壳体上拆下。
- 通过孔将工具 (B) 安装到接头 (4) 中。
- 拆下用于将接头 (4) 固定在位的螺栓 (3) 。
- 将接头 (4) 滑动到工具 (B) 上。 将适当的起吊设备连接到接头 (4) 上。 接头 (4) 的重量约为 65 kg (143 lb)。 将接头 (4) 从工具 (B) 上拆下。
Caterpillar Information System:
TA19-M2WD and TA19-M4WD Agricultural Transmissions Daily Inspection
3612 and 3616 Engines Crankshaft Front Seal - Install
3612 and 3616 Engines Crankshaft Front Seal - Remove
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Data - Capture
C13 and C15 On-highway Engines Power Take-Off - Test
C13 and C15 On-highway Engines Kickout Bypass - Test
2006/08/07 A New O-ring is Now Used {1063, 1380}
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Log File - Retrieve
2006/08/07 Marine Engines are Shipped Without Oil {1348}
C15 On-Highway Engine Inlet and Exhaust Valve Springs - Remove and Install
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Emergency Power Off - Reset
C27 and C32 Generator Set Engines Aftercooler - Remove
3612 and 3616 Engines Crankshaft Rear Seal - Install
C13 and C15 On-highway Engines Shutdown (PTO) - Test
C13 and C15 On-highway Engines Shutdown Timer (Idle) - Test
C7 Engines for Caterpillar Built Machines Valve Mechanism
C13 and C15 On-highway Engines Speed Control (PTO) - Test
3612 and 3616 Engines Crankshaft Front Gear - Remove and Install
3612 and 3616 Engines Crankshaft Rear Gear - Remove and Install
3508B, 3512B, and 3516B High Displacement Generator Sets Monitoring System
C13 and C15 On-highway Engines Starting Aid - Test
C13 and C15 On-highway Engines Tachometer - Test
C13 and C15 On-highway Engines Torque Limit - Test
C13 and C15 On-highway Engines Transmission Shift Control - Test