2006/08/21 Caterpillar


New High Efficiency Oil Filters are Now Available {1308}

Usage:

769C 01X
Machine Engines:
  • 3054E
  • 3056E
  • 3114
  • 3116
  • 3126
  • 3126B
  • 3176
  • 3176C
  • 3196
  • 3304
  • 3306
  • 3406
  • 3406B
  • 3406C
  • 3406E
  • 3408
  • 3408E
  • 3412
  • 3412E
  • 3456
  • C-12
  • C-15
  • C-16
  • C-9
  • Service Magazine, SEPD0844, 03 July 2006, "New High Efficiency Oil Filters are Now Available". Disregard this article. Refer to the article that follows.

    Two new high efficiency engine oil filters are now available with an improved filter medium. The new high efficiency 1R-1807 Engine Oil Filter Assembly is a service replacement for the 1R-0739 Engine Oil Filter Assembly and the new high efficiency 1R-1808 Engine Oil Filter Assembly is a service replacement for the 1R-0716 Engine Oil Filter Assembly. These new spin-on oil filters were released for new production engines January 2004. These new high efficiency engine oil filters are now the preferred filters for a replacement preventive maintenance program. The new high efficiency engine oil filters enable customers to increase the capabilities of controlling contamination over the standard filters. The new high efficiency engine oil filters will not reduce the recommended Caterpillar oil change intervals.

    Table 1
    Cross-reference for Engine Oil Filters    
    Standard Engine Oil Filter     High Efficiency Engine Oil Filter    
    1R-0739     1R-1807    
    1R-0716     1R-1808    

    These new high efficiency oil filters are approved for engines in all applications that use the former standard oil filters that are listed above. These new high efficiency spin-on oil filters with the improved filter medium result in an increased capacity in contamination control. Therefore, these filters are more efficient in providing increased filtration with excellent capacity in order to retain dirt with a minimal pressure drop. These new high efficiency engine oil filters provide improved protection for HEUI injectors, pump components, the injection actuation pressure control system, and other critical engine components. Illustration 2 and 3 below illustrates the improvements in the filtration of the standard versus new filters. Illustration 4 below illustrates the minor differences between the capacity of the new filter versus the standard filter in order to hold dirt.




    Illustration 1g01059369



    Illustration 2g01059150



    Illustration 3g01059151



    Illustration 4g01059152

    Caterpillar Information System:

    UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Field Coil Driver
    3512C Engine for Caterpillar Built Machines Air Shutoff System
    Bench Test Procedure For A TA22-M4WD Agricultural Transmission {3030, 3073} Bench Test Procedure For A TA22-M4WD Agricultural Transmission {3030, 3073}
    TA22-4WD Agricultural Transmission Transmission Oil Level - Check
    TA22-4WD Agricultural Transmission Transmission Oil - Change
    C175-16 and C175-20 Generator Set Engines Electronic Control Module (ECM)
    14M and 16M Motor Graders Power Train Relief Valve (Cooler Bypass)
    3508B, 3512B, and 3516B High Displacement Generator Sets Air Shutoff - Test - Engines That Are Equipped with ADEM II or ADEM III Engine Control Modules
    C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package General Hazard Information
    UPS 1000S/ UPS 1200S Uninterruptible Power Supplys DC Bus Bleed Off Resistors
    3612 and 3616 Engines Air Starting Motor - Assemble
    3500 Industrial Engines Exhaust Flange
    CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 525 - FMI 9
    G3516C and G3516E Gas Engines Engine Speed Sensor
    UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Inverter Assembly
    3512C Engine for Caterpillar Built Machines Analog Sensor (Active)
    3512C Engine for Caterpillar Built Machines CAN Data Link
    3512C Engine for Caterpillar Built Machines Cat Data Link
    3512C Engine for Caterpillar Built Machines Electrical Power Supply
    3508B, 3512B, and 3516B High Displacement Generator Sets Air Shutoff Damper - Remove/Check
    2006/07/03 The Stud Tensioner Tool Groups for 3600, C280, and G3600 Engines Require Different Hydraulic Pressures {0703, 0705, 1100, 1202, 1203}
    3512C Engine for Caterpillar Built Machines Emergency Stop Switch
    3606 and 3608 Engines Exhaust Manifold - Remove and Install - 3606
    3606 and 3608 Engines Exhaust Manifold - Remove and Install - 3608
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.