374F Excavator Machine System Caterpillar


Pressure Switch (Refrigerant Pressure Cutoff)

Usage:

374F L AP4


Illustration 1g06407932

Table 1
Item  Qty  Part  Specification Description 
Working Range (Temperature): 
−30° to 100° C (−22° to 212° F) 
Refrigerant: 
R-134a 
Working Range (High Pressure): 
OFF: 3140 ± 200 kPa (455 ± 29 psi) 
DIFFERENTIAL (Minimum): 590 kPa (86 psi) 
Working Range (Low Pressure): 
OFF: 196 ± 20 kPa (28 ± 3 psi) 
DIFFERENTIAL (Minimum): 20 kPa (3 psi) 

Caterpillar Information System:

Installing the Updated Hoses For the Tilt Lines and the Implement Pump{5057, 5084} Installing the Updated Hoses For the Tilt Lines and the Implement Pump{5057, 5084}
D6G Series 2 Track-Type Tractor Fuses and Circuit Breakers - Replace/Reset
Improving the Cab Environment for the Operator of Track-Type Tractors{7301, 7304, 7320} Improving the Cab Environment for the Operator of Track-Type Tractors{7301, 7304, 7320}
657G Wheel Tractor-Scraper Engine Supplement Coolant Tank - Remove and Install
Inlet Air Heater Failure on Wheel Loaders, Track-Type Loaders, and Track-Type Tractors{1090} Inlet Air Heater Failure on Wheel Loaders, Track-Type Loaders, and Track-Type Tractors{1090}
C4.4 Industrial Engine Engine Valve Lash - Inspect/Adjust
D6G Series 2 Track-Type Tractor Battery Disconnect Switch
D6G Series 2 Track-Type Tractor Window Washer Reservoir - Fill
C11 and C13 Engines Muffler
3176C Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System) Electrical System
D7G2 Track-Type Tractor Power Train Track Tension - Test and Adjust
C13, C15, and C18 Tier 4 Final Engines Electronic Unit Injector Rocker Arm
854K Wheel Dozer Hydraulic System Oil Sample (Implement) (Hydraulic Fan) - Obtain
Installation of a 3406 Engine Emissions Upgrade Group Retrofit for a D8N Track-Type Tractor {1000, 7000} Installation of a 3406 Engine Emissions Upgrade Group Retrofit for a D8N Track-Type Tractor {1000, 7000}
854K Wheel Dozer Hydraulic System Oil Sample (Steering) (Brake) - Obtain
C11 and C13 Engines Liquid Level Sensor (Water Separator)
657G Wheel Tractor-Scraper Rollover Protective Structure (ROPS) - Inspect
C4.4 Industrial Engine Fuel Priming Pump - Remove and Install - Electric Fuel Priming Pump
D7G Series 2 and D7G Series II Track-Type Tractors Operation Information
657G Wheel Tractor-Scraper Engine Supplement Radiator Core - Remove and Install
657G Wheel Tractor-Scraper Engine Supplement Aftercooler - Remove and Install
D7G Series 2 and D7G Series II Track-Type Tractors Stopping the Engine
2006/06/26 Hole in the Turbine Housing of the Turbocharger {1052}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.