C11 and C13 Engines Caterpillar


Muffler

Usage:

730C2 2L7



图 1g03644723

表 1
231-2160 消声器和安装件总成 的技术规格    
项目     数量     零件     技术规格说明    
1     1     380-9871 消音器卡箍     拧紧至扭矩为
40 ± 5 N·m (30 ± 4 lb ft)。    
2     1     388-7016 弯曲螺栓卡箍     卡箍组件上的开口绝对不能与喷油器上的槽对齐。
拧紧至扭矩为
47 ± 5 N·m (35 ± 4 lb ft)。    
3     1     9N-1941 V 形带卡箍     拧紧至扭矩为
8.5 ± 1.0 N·m (75.2 ± 8.9 lb in)。    
4     1     250-0832 管     装配前,使用 Loctite C5A 铜防咬合剂润滑螺纹和轴承表面。    

Caterpillar Information System:

3176C Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System) Electrical System
D7G2 Track-Type Tractor Power Train Track Tension - Test and Adjust
854K Wheel Dozer Hydraulic System Oil Filter (Steering Pilot) - Replace
D7G Series 2 and D7G Series II Track-Type Tractors Engine Starting with Auxiliary Start Receptacle
D6G Series 2 Track-Type Tractor Power Train Visual Inspection
D7G2 Track-Type Tractor Power Train Machine Preparation
D7G Series 2 and D7G Series II Track-Type Tractors Engine and Machine Warm-Up
Installation of a 3406 Engine Emissions Upgrade Group Retrofit for 980F and 980F Series II Wheel Loader (Single HP and Dual HP){1000, 1000} Installation of a 3406 Engine Emissions Upgrade Group Retrofit for 980F and 980F Series II Wheel Loader (Single HP and Dual HP){1000, 1000}
Bench Test Procedure For A 589 Pipelayer, D8L, D9L, D9N, And D10N Track-Type Tractor Torque Converter{3101} Bench Test Procedure For A 589 Pipelayer, D8L, D9L, D9N, And D10N Track-Type Tractor Torque Converter{3101}
C4.4 Industrial Engine Turbocharger - Inspect
854K Wheel Dozer Hydraulic System Oil Filter (Implement Pilot) - Replace
D6G Series 2 Track-Type Tractor Window Washer Reservoir - Fill
D6G Series 2 Track-Type Tractor Battery Disconnect Switch
C4.4 Industrial Engine Engine Valve Lash - Inspect/Adjust
Inlet Air Heater Failure on Wheel Loaders, Track-Type Loaders, and Track-Type Tractors{1090} Inlet Air Heater Failure on Wheel Loaders, Track-Type Loaders, and Track-Type Tractors{1090}
657G Wheel Tractor-Scraper Engine Supplement Coolant Tank - Remove and Install
Improving the Cab Environment for the Operator of Track-Type Tractors{7301, 7304, 7320} Improving the Cab Environment for the Operator of Track-Type Tractors{7301, 7304, 7320}
D6G Series 2 Track-Type Tractor Fuses and Circuit Breakers - Replace/Reset
Installing the Updated Hoses For the Tilt Lines and the Implement Pump{5057, 5084} Installing the Updated Hoses For the Tilt Lines and the Implement Pump{5057, 5084}
374F Excavator Machine System Pressure Switch (Refrigerant Pressure Cutoff)
C13, C15, and C18 Tier 4 Final Engines Electronic Unit Injector Rocker Arm
854K Wheel Dozer Hydraulic System Oil Sample (Implement) (Hydraulic Fan) - Obtain
Installation of a 3406 Engine Emissions Upgrade Group Retrofit for a D8N Track-Type Tractor {1000, 7000} Installation of a 3406 Engine Emissions Upgrade Group Retrofit for a D8N Track-Type Tractor {1000, 7000}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.