Radiator Core - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件名称     | 数量     |
A     | 178-3704     | 起重支架组件     | 1     |
开始:
- 拆下冷却液箱。 请参阅拆解和组装, "冷却液箱 - 拆卸和安装"。
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 需要用两个人拆下防护罩组件 (2) 。 防护罩组件 (2) 的重量约为 23 kg (50 lb)。
Show/hide table
图 1 | g01279560 |
- 将工具 (A) 和适当的起吊设备连接到散热器芯 (1) 上。 拆下散热器芯 (1) 。 散热器芯 (1) 的重量约为 29 kg (65 lb)。 对其余的散热器芯重复同样的步骤。
- 拆下密封件 (3) 。
Show/hide table
图 2 | g01279575 |
安装步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件名称     | 数量     |
A     | 178-3704     | 起重支架组件     | 1     |
B     | 207-1600     | 橡胶润滑剂     | -     |
207-1601 (1) | 橡胶润滑剂     | -     |
Show/hide table
( 1 ) | 仅用于 EAME |
- 安装新密封件 (3) 。
Show/hide table
图 3 | g01279575 |
- 使用工具 (B) 润滑密封件 (3) 的密封区域。
- 将工具 (A) 和适当的起吊设备连接到散热器芯 (1) 上。 定位散热器芯 (1) 。 散热器芯 (1) 的重量约为 29 kg (65 lb)。 对其余的散热器芯重复同样的步骤。
Show/hide table
图 4 | g01279560 |
- 需要用两个人安装防护罩组件 (2) 。 防护罩组件 (2) 的重量约为 23 kg (50 lb)。
End By: 安装冷却液箱。 请参阅 拆解和组装, "冷却液箱 - 拆卸和安装"。
Caterpillar Information System:
D7G Series 2 and D7G Series II Track-Type Tractors Operation Information
C4.4 Industrial Engine Fuel Priming Pump - Remove and Install - Electric Fuel Priming Pump
657G Wheel Tractor-Scraper Rollover Protective Structure (ROPS) - Inspect
C11 and C13 Engines Liquid Level Sensor (Water Separator)
854K Wheel Dozer Hydraulic System Oil Sample (Steering) (Brake) - Obtain
Installation of a 3406 Engine Emissions Upgrade Group Retrofit for a D8N Track-Type Tractor {1000, 7000} Installation of a 3406 Engine Emissions Upgrade Group Retrofit for a D8N Track-Type Tractor {1000, 7000}
854K Wheel Dozer Hydraulic System Oil Sample (Implement) (Hydraulic Fan) - Obtain
C13, C15, and C18 Tier 4 Final Engines Electronic Unit Injector Rocker Arm
374F Excavator Machine System Pressure Switch (Refrigerant Pressure Cutoff)
Installing the Updated Hoses For the Tilt Lines and the Implement Pump{5057, 5084} Installing the Updated Hoses For the Tilt Lines and the Implement Pump{5057, 5084}
D6G Series 2 Track-Type Tractor Fuses and Circuit Breakers - Replace/Reset
Improving the Cab Environment for the Operator of Track-Type Tractors{7301, 7304, 7320} Improving the Cab Environment for the Operator of Track-Type Tractors{7301, 7304, 7320}
657G Wheel Tractor-Scraper Engine Supplement Aftercooler - Remove and Install
D7G Series 2 and D7G Series II Track-Type Tractors Stopping the Engine
2006/06/26 Hole in the Turbine Housing of the Turbocharger {1052}
854K Wheel Dozer Fuel System - Prime
2006/06/26 Hole in the Turbine Housing of the Turbocharger {1052}
637G Wheel Tractor-Scraper Sound Information and Vibration Information
D6G Series 2 Track-Type Tractor Capacities (Refill)
C4.4 Industrial Engine Valve Depth - Inspect
854K Wheel Dozer Belt - Inspect/Adjust/Replace
854K Wheel Dozer VIMS Monitoring System
D6G Series 2 Track-Type Tractor Fuel System Primary Filter (Water Separator) - Drain
Metal Shavings in the Hydraulic Electronic Unit Injector (HEUI) Oil Passages{1250, 1274} Metal Shavings in the Hydraulic Electronic Unit Injector (HEUI) Oil Passages{1250, 1274}