Inlet Air Heater Failure on Wheel Loaders, Track-Type Loaders, and Track-Type Tractors{1090} Caterpillar


Inlet Air Heater Failure on Wheel Loaders, Track-Type Loaders, and Track-Type Tractors{1090}

Usage:

938F 1KM
Track-Type Loader:
963C (S/N: BBD1-UP)
Track-Type Tractor:
D5N (S/N: AKD1-UP; AGG1-UP)
D6M (S/N: 3WN1-UP; 4JN1-UP)
D6N (S/N: ALH1-UP; ALR1-UP; CCS1-UP; ALY1-UP)
Wheel Loader:
938F (S/N: 1KM1-UP)
938G Series II (S/N: CRD1-UP)
950G Series II (S/N: BAA1-UP; AYL1-UP; AXX1-UP)
950H (S/N: N1A1-UP)

Introduction

This Technical Information Bulletin replaces the November 11, 2005 Technical Information Bulletin, "Inlet Air Heater Failure on Wheel Loaders, Track Type Loaders, and Track Type Tractors". Disregard the Technical Information Bulletin that is dated November 11, 2005. Refer to the following information.

Problem

The 159-3537 Air Inlet Heater Assembly may fail and result in substantial damage to 3126B powered Caterpillar engines.

Solution

Replace failed 159-3537 Air Inlet Heater Assembly with a like part. Return the failed part to:

Caterpillar Inc.
Bldg. C, Dock 22
8201 North University
Peoria, IL 61615
Attn: Chuck Runyan

Caterpillar Information System:

C4.4 Industrial Engine Engine Valve Lash - Inspect/Adjust
D6G Series 2 Track-Type Tractor Battery Disconnect Switch
D6G Series 2 Track-Type Tractor Window Washer Reservoir - Fill
C11 and C13 Engines Muffler
3176C Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System) Electrical System
D7G2 Track-Type Tractor Power Train Track Tension - Test and Adjust
854K Wheel Dozer Hydraulic System Oil Filter (Steering Pilot) - Replace
D7G Series 2 and D7G Series II Track-Type Tractors Engine Starting with Auxiliary Start Receptacle
D6G Series 2 Track-Type Tractor Power Train Visual Inspection
D7G2 Track-Type Tractor Power Train Machine Preparation
D7G Series 2 and D7G Series II Track-Type Tractors Engine and Machine Warm-Up
657G Wheel Tractor-Scraper Engine Supplement Coolant Tank - Remove and Install
Improving the Cab Environment for the Operator of Track-Type Tractors{7301, 7304, 7320} Improving the Cab Environment for the Operator of Track-Type Tractors{7301, 7304, 7320}
D6G Series 2 Track-Type Tractor Fuses and Circuit Breakers - Replace/Reset
Installing the Updated Hoses For the Tilt Lines and the Implement Pump{5057, 5084} Installing the Updated Hoses For the Tilt Lines and the Implement Pump{5057, 5084}
374F Excavator Machine System Pressure Switch (Refrigerant Pressure Cutoff)
C13, C15, and C18 Tier 4 Final Engines Electronic Unit Injector Rocker Arm
854K Wheel Dozer Hydraulic System Oil Sample (Implement) (Hydraulic Fan) - Obtain
Installation of a 3406 Engine Emissions Upgrade Group Retrofit for a D8N Track-Type Tractor {1000, 7000} Installation of a 3406 Engine Emissions Upgrade Group Retrofit for a D8N Track-Type Tractor {1000, 7000}
854K Wheel Dozer Hydraulic System Oil Sample (Steering) (Brake) - Obtain
C11 and C13 Engines Liquid Level Sensor (Water Separator)
657G Wheel Tractor-Scraper Rollover Protective Structure (ROPS) - Inspect
C4.4 Industrial Engine Fuel Priming Pump - Remove and Install - Electric Fuel Priming Pump
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.