D6G Series 2 Track-Type Tractor Caterpillar


Battery Disconnect Switch

Usage:

D6G BWJ



Ilustrasi 1g01278951

Sakelar pemutus hubungan baterai terletak di samping kiri alat berat di belakang pintu akses.




Ilustrasi 2g01278954


ON - Masukkan kunci dan putar kunci searah jarum jam untuk mengaktifkan sistem kelistrikan. Sakelar harus berada pada posisi ON sebelum menghidupkan engine.


OFF - Putar kunci berlawanan arah jarum jam untuk mematikan seluruh sistem kelistrikan.

Cabut kunci bilamana hendak meninggalkan alat berat semalaman atau pada saat meninggalkan alat berat untuk jangka waktu yang lama. Demikian juga, cabut kunci pada saat melakukan servis pada sistem kelistrikan.


PERHATIAN

Jangan memutar sakelar pemutus hubungan baterai ke posisi OFF sementara engine sedang hidup. Kerusakan serius pada sistem kelistrikan dapat terjadi.


Caterpillar Information System:

D6G Series 2 Track-Type Tractor Window Washer Reservoir - Fill
C11 and C13 Engines Muffler
3176C Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System) Electrical System
D7G2 Track-Type Tractor Power Train Track Tension - Test and Adjust
854K Wheel Dozer Hydraulic System Oil Filter (Steering Pilot) - Replace
D7G Series 2 and D7G Series II Track-Type Tractors Engine Starting with Auxiliary Start Receptacle
D6G Series 2 Track-Type Tractor Power Train Visual Inspection
D7G2 Track-Type Tractor Power Train Machine Preparation
D7G Series 2 and D7G Series II Track-Type Tractors Engine and Machine Warm-Up
Installation of a 3406 Engine Emissions Upgrade Group Retrofit for 980F and 980F Series II Wheel Loader (Single HP and Dual HP){1000, 1000} Installation of a 3406 Engine Emissions Upgrade Group Retrofit for 980F and 980F Series II Wheel Loader (Single HP and Dual HP){1000, 1000}
Bench Test Procedure For A 589 Pipelayer, D8L, D9L, D9N, And D10N Track-Type Tractor Torque Converter{3101} Bench Test Procedure For A 589 Pipelayer, D8L, D9L, D9N, And D10N Track-Type Tractor Torque Converter{3101}
C4.4 Industrial Engine Engine Valve Lash - Inspect/Adjust
Inlet Air Heater Failure on Wheel Loaders, Track-Type Loaders, and Track-Type Tractors{1090} Inlet Air Heater Failure on Wheel Loaders, Track-Type Loaders, and Track-Type Tractors{1090}
657G Wheel Tractor-Scraper Engine Supplement Coolant Tank - Remove and Install
Improving the Cab Environment for the Operator of Track-Type Tractors{7301, 7304, 7320} Improving the Cab Environment for the Operator of Track-Type Tractors{7301, 7304, 7320}
D6G Series 2 Track-Type Tractor Fuses and Circuit Breakers - Replace/Reset
Installing the Updated Hoses For the Tilt Lines and the Implement Pump{5057, 5084} Installing the Updated Hoses For the Tilt Lines and the Implement Pump{5057, 5084}
374F Excavator Machine System Pressure Switch (Refrigerant Pressure Cutoff)
C13, C15, and C18 Tier 4 Final Engines Electronic Unit Injector Rocker Arm
854K Wheel Dozer Hydraulic System Oil Sample (Implement) (Hydraulic Fan) - Obtain
Installation of a 3406 Engine Emissions Upgrade Group Retrofit for a D8N Track-Type Tractor {1000, 7000} Installation of a 3406 Engine Emissions Upgrade Group Retrofit for a D8N Track-Type Tractor {1000, 7000}
854K Wheel Dozer Hydraulic System Oil Sample (Steering) (Brake) - Obtain
C11 and C13 Engines Liquid Level Sensor (Water Separator)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.