Transmission Oil Cooler - Install - Engine in Chassis
Installation Procedure
- Use the hoist to install the transmission oil cooler. The weight of the transmission oil cooler is 32 kg (70 lb).
Show/hide table
 | |
| Illustration 1 | g00892609 |
Show/hide table
 | |
| Illustration 2 | g00892659 |
- Install bolts (3) .
- Install the tube assemblies, the flanges, and bolts (2) .
Show/hide table
 | |
| Illustration 3 | g00892606 |
- Install bolts (1) and the clamp that holds the transmission oil cooler to the bracket.
Show/hide table
 | |
| Illustration 4 | g00892602 |
- Tighten the drain plug that is located on the transmission oil cooler, if necessary.
- Fill the cooling system. Refer to Operation and Maintenance Manual.
End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Gear Pump (Braking and Hydraulic Fan)
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Cooler Bypass Valve - Remove and Install
3412E Engine for Caterpillar Built Machines Sensors and Electrical Connectors
2002/06/01 New Service Information Tool for CAT Dealers is Now Available {1000}
2002/05/27 Special Instruction, REHS1146 , "Improved Air Conditioning on Large Track-Type Tractors" is Available {7320}
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Gear Motor (Hydraulic Fan)
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill CompactorEngine Supplement Transmission Oil Cooler - Remove - Engine in Chassis
2003/10/13 New End Seals Improve Service Life {7206}
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System Pump Performance (Implement) - Test
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill CompactorEngine Supplement Turbocharger - Install - Engine in Chassis
2002/05/27 A New Drive Shaft Yoke is Used for the Winch {5165}
966G Series II Wheel Loader and 972G Series II Wheel Loader Power Train Torque Converter Stall - Test
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill CompactorEngine Supplement Engine Oil Cooler - Remove - Engine in Chassis
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System Implement Cycle Time - Check
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill CompactorEngine Supplement Engine Oil Cooler - Install - Engine in Chassis
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill CompactorEngine Supplement Fuel Transfer Pump - Remove and Install
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill CompactorEngine Supplement Fuel Tank - Remove
2004/05/17 Service Parts for the Lubrication Pump are now Available {7516, 7540}
IT28G Integrated Toolcarrier and 924G, 924Gz and 928G Wheel Loaders Steering System Metering Pump (HMU) - Test
2002/06/17 A Stronger Lever Assembly Is Used In The Fuel Injection Control Groups {1298}
904B Compact Wheel Loader Engine Air Filter Secondary Element - Replace
2003/02/24 A New Breaker Relief Valve is Used {5118}
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill CompactorEngine Supplement Fuel Tank - Install
IT28G Integrated Toolcarrier and 924G, 924GZ, 928G and 930G Wheel Loaders Drive Shaft Support Bearing - Lubricate