Usage:
NOTE: Torque for four 12.7 mm (.50 in) self locking bolts that hold the lift and tilt control valve in the tank (two valve tanks only) ... 100 ± 5 N·m (75 ± 4 lb ft)
NOTE: Torque for eight 12.7 mm (.50 in) self locking bolts [six in lift and tilt control valve and two in third control valve that hold the control valves in the tank (three valve tanks only)] ... 100 ± 5 N·m (75 ± 4 lb ft)
(1) Torque for four nuts on filter adapter ... 32.5 ± 2.5 N·m (24 ± 2 lb ft)
(2) Torque for tank breather valve ... 80 ± 4 N·m (60 ± 3 lb ft)
(3) Torque for two nuts on breather ... 32.5 ± 2.5 N·m (24 ± 2 lb ft)
(4) Torque for stud on filter ... 32.5 ± 2.5 N·m (24 ± 2 lb ft)
(5) Torque for nut on filter ... 10.0 ± 2.5 N·m (7 ± 1 lb ft)
(6) Torque for two nuts on bracket ... 32.5 ± 2.5 N·m (24 ± 2 lb ft)
(7) Torque for two nuts ... 32.5 ± 2.5 N·m (24 ± 2 lb ft)
(8) IL-4349 Spring:
Length under test force ... 106.0 mm (4.17 in)
Test force ... 84 ± 7 N (19 ± 2 lb)
Free length after test ... 139.7 mm (5.50 in)
Outside diameter ... 24.41 mm (.961 in)
(9) Torque for four nuts on screen adapter ... 32.5 ± 2.5 N·m (24 ± 2 lb ft)
(10) Torque for bolts (8 on two valve tanks and 12 on three valve tanks) ... 100 ± 5 N·m (75 ± 4 lb ft)
(11) Torque for two nuts on drain housing ... 32.5 ± 2.5 N·m (24 ± 2 lb ft)
(12) Torque for twelve (12) locknuts ... 32.5 ± 2.5 N·m (24 ± 2 lb ft)
(13) Torque for couplings ... 19.0 ± 1.5 N·m (14 ± 1 lb ft)
NOTE: Studs should be adjusted to approximately equal lengths.
(14) Torque for two nipples on pressure taps ... 36 ± 3 N·m (27 ± 2 lb ft)
(1) Torque for four nuts on filler tube ... 32.5 ± 2.5 N·m (24 ± 2 lb ft)
(2) Torque for four nuts on sight glass ... 32.5 ± 2.5 N·m (24 ± 2 lb ft)
(3) Torque for drain plug ... 136 ± 7 N·m (100 ± 5 lb ft)