Windshield Wiper Motor (Rear)
Usage:
Remove & Install Windshield Wiper Motor (Rear)
1. Remove two bolts and cover (1).
2. Disconnect wiring harness (2) and (3).
3. Remove nut (4) and precleaner cover (5) and body (6).
4. Remove nut (7) and wiper arm (8).
5. Remove nut (9) and bolt (8) and remove rear wiper motor from inside the cab.
NOTE: Install in reverse order.
Caterpillar Information System:
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Windshield Wiper Motor (Front)
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Mirror
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Transmission Oil Cooler
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Cab Recirculation Air Filter (Interior)
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Cab Air Filter (Exterior)
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Air Cleaner Elements & Housing
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Engine
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Cab
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Fuel Priming Pump And Primary Fuel Filter
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Radiator Support Assembly
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Radiator
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Radiator Guard
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Windshield Washer Pumps
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Alternator Belt
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Air Conditioning Belt
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Hydraulic Implement Fill And Air Removal Procedures
953C TRACK-TYPE LOADER POWER TRAIN Schematic
953C TRACK-TYPE LOADER HYDRAULICS Introduction
953C TRACK-TYPE LOADER HYDRAULICS Hydraulic Pump
953C TRACK-TYPE LOADER HYDRAULICS Tank And Valve Group
953C TRACK-TYPE LOADER HYDRAULICS Valves
953C TRACK-TYPE LOADER HYDRAULICS Cylinders
953C TRACK-TYPE LOADER HYDRAULICS Ripper Mounting Group
953C TRACK-TYPE LOADER HYDRAULICS Ripper Cylinder Mounting Group