1981/06/01 Caterpillar


Some Single Part Numbers Have Two Half Bearings{7551}

Usage:


There have been reports of problems in the field when half bearings are ordered. The problems are:

...some parts books show the quantity of half bearings used.

...dealers order the quantity of half bearings; the shipment has two half bearings for each part number ordered, which gives the dealer double the quantity of half bearings.

It takes two half bearings to make a complete bearing in most applications like hydraulic cylinder bracket groups and engines. Two half bearings will be sent in a box that shows a quantity of one complete bearing (MQ1).

Caterpillar Information System:

1981/06/01 New Seals And Clutch Discs Used{3300,3302}
1981/06/01 Correct Use Of Keystone Ring Groove Gauges{1214,1215,1312,0653}
1981/06/01 Locks No Longer Used On Flywheel Bolts; New Torque Specifications For Flywheel Bolts{1156}
1981/05/25 Air System Leakage Can Cause Problems With Engine Governor Stability At Low Idle RPM{1264,1803}
1981/05/25 New Cover Assembly And Gasket Used In Oil Pump Group{7418}
1981/05/25 Washer Added Between Bolt And Thrust Plate For Oil Pump Idler Gear{1206}
1981/05/25 Use Correct Specifications To Check Piston Ring Gaps{1215}
1981/05/25 Instruction Cards For "Go-No Go" Gauges Now Available{0653}
1981/05/18 New Mounting Group For Overspeed Switch{7410}
1981/05/18 Replacement Bushings For Delco-Remy Electric Starting Motors Must Be Machined For Correct Clearances{1453,1454,1465}
1981/05/18 Change Made To Power Take-Off Adapter Housing{3055}
1981/05/18 Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/06/01 New Service Meter Used In Mechanical Shutoff Group{7478}
1981/06/01 Hardened Nuts And Higher Torque Now Used In Ahead And Astern Clutch Groups{3302}
1981/06/08 Inspect Piston Skirts During Engine Overhaul Procedures{1214,1213}
1981/06/08 Troubleshooting Water In Shut-Off Solenoid Housing{1259}
1981/06/08 Remanufactured Clutch Plates Available For Power Shift Transmissions{3155,0375}
1981/06/15 Procedure To Stop Lubricant Leakage From Flexible Couplings{3252}
1981/06/15 Plastic Cases Now Available For Electronic Testing And Diagnostic Equipment{0630,0650}
1981/06/22 6V3145 Leveler Now Available{0644}
1981/06/22 Cylinder Liners Can Now Be Reconditioned Automatically{0664,0674,1216}
1981/06/22 Larger Air Cleaner Used For Less Restriction To Air Flow{1051}
1981/06/29 Ring Now Used To Hold Bearing In Auxiliary Drive Group{1165}
1981/06/29 New Gasket Used In Front Housing Group{1166,1162,1151}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.