The Design of the 391-4038 Head Allows for Alignment of the Bore of the Sleeve with the Bore of the Bushings on H75E s Hammers {6333}
- Work Tool:
- H75E S (S/N: X9E1-UP)
In the design of head (1), there is an unmachined surface (B) of the center bore. This Unmachined surface (B) may not be align with the bore of sleeve (2) or the bore of bushings (3) and (4). The misalignment does not affect the proper operation of the Hammer. The bore of sleeve (2) and the bore of bushings (3) and (4) are in alignment, continue using existing head (1).
Show/hide table
 | |
| Illustration 1 | g03424179 |
Cross section of front head (A) Machined surface (B) Unmachined surface (1) 391-4038 Head (2) 369-1556 Piston Sleeve (3) 369-1558 Bushing (4) 369-1559 Bushing | |
Caterpillar Information System:
2013/08/27 A Rework Procedure to Replace the Adjustment Screw on Certain B20 Hammers {6333}
Installation Procedure for the 443-7976 Control Gp on Certain Hydraulic Excavators {1931, 7600} Installation Procedure for the 443-7976 Control Gp on Certain Hydraulic Excavators {1931, 7600}
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Hydraulic Cylinder - Assemble
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Hydraulic Cylinder - Disassemble
M316C Excavator Machine System Relief Valve (Main)
M316C Excavator Machine System Control Valve (Main)
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Speed Control Valve - Disassemble - MP324
312F and 313F Excavators Monitoring System
Hydraulic Thumbs Stop - Inspect/Replace
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System One-Way/One or Two Pump - Electric Control
314E CR and 314E SR Excavator Systems Cylinder (Blade) - If Equipped
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Air Cleaner - Remove and Install
349F and 352F Excavators Engine Supplement Diesel Exhaust Fluid Lines - Remove and Install - Clean Emissions Module
349F and 352F Excavators ECM - Replace
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Speed Control Valve - Assemble - MP324
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Two-Way/One Pump - Electric Control
Installation Procedure for the 443-7977 Valve Wiring Gp on Certain Hydraulic Excavators{1408, 5734} Installation Procedure for the 443-7977 Valve Wiring Gp on Certain Hydraulic Excavators{1408, 5734}
326F, 329F and 330F Excavators Machine Systems Swing Cushion Valve - Remove and Install
Procedure to Install 443-0252 Connecting Lines Gp {5057} Procedure to Install 443-0252 Connecting Lines Gp {5057}
Procedure to Install 443-0253 Connecting Lines Gp {5057} Procedure to Install 443-0253 Connecting Lines Gp {5057}
Bench Test Procedure for Hydraulic Piston Pumps {5070} Bench Test Procedure for Hydraulic Piston Pumps {5070}
Procedure to Install 443-0254 Connecting Lines Group {5057} Procedure to Install 443-0254 Connecting Lines Group {5057}
349F and 352F Excavators Sensor Signal (PWM) - Test
Procedure to Install 443-0256 Connecting Lines Group {5057} Procedure to Install 443-0256 Connecting Lines Group {5057}