Air Cleaner - Remove and Install
- Loosen clamp (3). Remove bolts (1). Remove pre-filter (2).
Show/hide table
Illustration 2 g03564897 - Remove cover (4).
Show/hide table
Illustration 3 g03564946 - Disconnect harness assemblies (5). Disconnect tube (6).
Show/hide table
Illustration 4 g03565176 - Attach a suitable lifting device to air cleaner (8). The weight of air cleaner (8) is approximately
91 kg (200 lb) . Remove bolts (7) and air cleaner (8).
Show/hide table
| |
| Illustration 1 | g03564865 |
- Install air cleaner (8) in the reverse order of removal.
- Tighten bolts (7) to a torque of
13 ± 2 N·m (115 ± 18 lb in) .
- Tighten bolts (7) to a torque of
Caterpillar Information System:
M316C Excavator Machine System Auxiliary Valve and Lines
M316C Excavator Machine System Window Wiper
M316C Excavator Machine System Operator Console
M316C Excavator Machine System Fan Guard
Command for Underground Customer Requirements {7605} Command for Underground Customer Requirements {7605}
349F and 352F Excavators Engine Supplement Exhaust Elbow - Remove and Install - Clean Emissions Module
CTV15, CTV20, CTV30 and CTV40 Clamshell Grapple/Verticle Cylinders Hydraulic Cylinder
CTV15, CTV20, CTV30 and CTV40 Clamshell Grapple/Verticle Cylinders Hydraulic Rotator
CTV15, CTV20, CTV30 and CTV40 Clamshell Grapple/Verticle Cylinders Grapple Hydraulic System
CTV15, CTV20, CTV30 and CTV40 Clamshell Grapple/Verticle Cylinders General Information
349F and 352F Excavators Connector Contact Description
326D2 Excavators Declaration of Conformity
314E CR and 314E SR Excavator Systems Cylinder (Blade) - If Equipped
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System One-Way/One or Two Pump - Electric Control
Hydraulic Thumbs Stop - Inspect/Replace
312F and 313F Excavators Monitoring System
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Speed Control Valve - Disassemble - MP324
M316C Excavator Machine System Control Valve (Main)
M316C Excavator Machine System Relief Valve (Main)
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Hydraulic Cylinder - Disassemble
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Hydraulic Cylinder - Assemble
Installation Procedure for the 443-7976 Control Gp on Certain Hydraulic Excavators {1931, 7600} Installation Procedure for the 443-7976 Control Gp on Certain Hydraulic Excavators {1931, 7600}
2013/08/27 A Rework Procedure to Replace the Adjustment Screw on Certain B20 Hammers {6333}
2013/08/23 The Design of the 391-4038 Head Allows for Alignment of the Bore of the Sleeve with the Bore of the Bushings on H75E s Hammers {6333}