Sensors and Electrical Connectors
Show/hide table
| 接头 | 功能 | |
| J1/P1 | ECM 接头（70 针发动机线束） | |
| J2/P2 | ECM 接头（70 针发动机线束） | |
| J61/P61 | 用户接头（40 针接头） | |
| J63/P63 | 维修工具接头（9 针接头） | |
| J66/P66 | 用户提供的维修工具接头（9 针接头） | |
| J100/P100 | 冷却液温度传感器（2 针接头） | |
| J103/P103 | 进气歧管空气温度传感器（2 针接头） | |
| J105/P105 | 燃油温度传感器（2 针接头） | |
| J142/P142 | 辅助温度传感器 | |
| J200/P200 | 涡轮增压器出口压力传感器（3 针接头） | |
| J201/P201 | 发动机机油压力传感器（3 针接头） | |
| J203/P203 | 大气压力传感器（3 针接头） | |
| J209/P209 | 燃油压力传感器 | |
| J220/P220 | 辅助压力传感器 | |
| J300/P300 | 喷油器电磁阀线束（12 针接头） | |
| J400/P400 | 发动机正时标定探头（2 针接头） | |
| J401/P401 | 主发动机转速/正时传感器（曲轴）（2 针接头） | |
| J402/P402 | 辅助发动机转速/正时传感器（凸轮轴）（2 针接头） | |
| J403/P403 | 油门位置传感器（3 针接头） | |
| J800/P800 | 发动机冷却液液位传感器 | |
Show/hide table
 | |
| 图 1 | g01072145 |
C-10、 C-12、 C-15 和 C-16 发动机的部件 | |
C-10 和 C-12 发动机
Show/hide table
 | |
| 图 2 | g00736757 |
传感器位置 | |
C-15 和 C-16 发动机
Show/hide table
 | |
| 图 3 | g00736758 |
传感器位置 | |
Caterpillar Information System:
3608 Engine Crankshaft Thrust - Measure
3054, 3054B and 3056 Marine Engines Installation Guide Jacket Water Heater
3054, 3054B and 3056 Marine Engines Installation Guide Troubleshooting
C-10, C-12, C-15 and C-16 Industrial Engines System Overview
2000/11/01 Measuring Exhaust Back Pressure {1050}
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Electrical System
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Compressor Protection System
3608 Engine Air Starting System Operation
3054 and 3056 Marine Generator Set Engines Engine Oil Pressure Switch - Remove and Install
3054 and 3056 Marine Generator Set Engines Coolant Temperature Switch - Remove and Install
3054 and 3056 Marine Generator Set Engines V-Belts - Remove and Install
G3304 and G3306 Engines Carburetor - Adjust
320E and 323E Excavators Boom and Stick Linkage - Lubricate - VA Boom (If Equipped)
3003, 3013, 3014 and 3024 Industrial Engines Cylinder Head Bolts - Tighten
C-10 and C-12 Industrial Engines Air Compressor
3126B Industrial Engines CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3606, 3608, 3612 and 3616 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Generator Monitoring System Thermocouple Module
3054 and 3056 Marine Generator Set Engines Crankshaft Front Seal - Remove
3054 and 3056 Marine Generator Set Engines Crankshaft Front Seal - Install
C-9 Industrial Engine CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
2000/12/01 Change of Mounting Location for the Middle Vibration Isolator on All 3508 Generator Set Packages {1021}
C-9 Industrial Engine CID 0110 FMI 04 Engine Coolant Temperature short to ground
3054 and 3056 Marine Generator Set Engines Lifter Group - Remove and Install
3054 and 3056 Marine Generator Set Engines Crankshaft Gear - Remove and Install