Check Valve (Cooler Bypass) - Remove
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 311-1362     | 真空表总成     | 1     |
- 将工具 (A) 安装到液压油箱上。 将一条供气软管连接到工具 (A) 上。 施加 138 kPa (20 psi) 的气压。 此步骤将使液压系统抽吸出真空。
- 断开软管组件 (1) 和 (3) 。 拆下旁通阀 (2) 。
Show/hide table
图 1 | g01622174 |
Caterpillar Information System:
2008/08/11 Procedure is Available to Improve the Mounting Locations of the Grab Handle. {7301}
307D Excavator Engine Supplement Refrigerant Compressor - Remove and Install
323D MHPU Mobile Hydraulic Power Unit Securing the Machine
345C Excavator (Ultra High Demolition) Hydraulic System Travel Hydraulic System
307D Excavator Engine Supplement Alternator - Remove and Install
2008/08/11 New C18 Cylinder Liners and O-ring Seals are Used {1201, 1216, 1216}
C4.2 and C6.4 Engines for Caterpillar Built Machines Fuel Injection Pump
345C Excavator (Ultra High Demolition) Hydraulic System Swing Hydraulic System
345C Excavator (Ultra High Demolition) Hydraulic System Cylinders (Boom, Stick and Bucket)
315D and 318D Excavators Machine System Specifications Solenoid Valve (Swing Motor)
323D Excavator Lifting Capacities
325C Excavator Machine Systems Sprocket - Remove and Install
307D Excavator Machine Systems Check Valve (Cooler Bypass) - Install
323D MHPU Mobile Hydraulic Power Unit Capacities (Refill)
319D Excavator Machine System Specifications Boom - 5.3 m (17.39 ft)
2008/08/18 An Improved Stick Regeneration Valve is Now Available for Certain Excavators {5051}
325D and 329D Excavators and 325D Material Handler Machine System Specifications Stick - 7.85 m (25.755 ft)
345C Excavator (Ultra High Demolition) Hydraulic System Control Valve (Straight Travel)
314D CR Hydraulic Excavator C4.2 Engine Supplement Coolant Tank (Expansion) - Remove and Install
323D MHPU Mobile Hydraulic Power Unit Maintenance Interval Schedule
325D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Operator Controls
Procedure for Repairing Cracks at the Mounting Locations for the Grab Handles on Machines with Cabs{7301} Procedure for Repairing Cracks at the Mounting Locations for the Grab Handles on Machines with Cabs{7301}
390D Excavator Restricted Visibility
325D and 329D Excavators and 325D Material Handler Machine System Specifications Front Lines - Boom Cylinder