Capacities (Refill)
Show/hide table
| Approximate Capacities (Refill) | ||||
|---|---|---|---|---|
| Component or System | Liters | US gal | Imp gal | Recommended Type |
| Cooling System | 25 | 7 | 6 | Cat ELC (Extended Life Coolant) |
| Coolant Reservoir | 1.5 | 0.4 | 0.3 | |
| Fuel Tank | 310.0 | 81.9 | 68.2 | No. 1 Diesel Fuel or No. 2 Diesel Fuel |
| Engine Crankcase with Filter | 30 | 7.9 | 6.6 | Refer to Operation and Maintenance Manual, "Lubricant Viscosities". |
| Hydraulic System(1) | 138 | 37 | 30.4 | |
| Swing Drive | 8 | 2.1 | 1.76 | |
| Swing Gear | 21.6 | 6 | 5 | Multipurpose Lithium Grease NLGI Grade 2 |
Show/hide table
| (1) | The amount of hydraulic fluid that is needed to refill the hydraulic system after you perform Operation and Maintenance Manual, "Hydraulic System Oil - Change" |
Caterpillar Information System:
307D Excavator Machine Systems Check Valve (Cooler Bypass) - Install
307D Excavator Machine Systems Check Valve (Cooler Bypass) - Remove
2008/08/11 Procedure is Available to Improve the Mounting Locations of the Grab Handle. {7301}
307D Excavator Engine Supplement Refrigerant Compressor - Remove and Install
323D MHPU Mobile Hydraulic Power Unit Securing the Machine
345C Excavator (Ultra High Demolition) Hydraulic System Travel Hydraulic System
307D Excavator Engine Supplement Alternator - Remove and Install
2008/08/11 New C18 Cylinder Liners and O-ring Seals are Used {1201, 1216, 1216}
C4.2 and C6.4 Engines for Caterpillar Built Machines Fuel Injection Pump
345C Excavator (Ultra High Demolition) Hydraulic System Swing Hydraulic System
345C Excavator (Ultra High Demolition) Hydraulic System Cylinders (Boom, Stick and Bucket)
315D and 318D Excavators Machine System Specifications Solenoid Valve (Swing Motor)
319D Excavator Machine System Specifications Boom - 5.3 m (17.39 ft)
2008/08/18 An Improved Stick Regeneration Valve is Now Available for Certain Excavators {5051}
325D and 329D Excavators and 325D Material Handler Machine System Specifications Stick - 7.85 m (25.755 ft)
345C Excavator (Ultra High Demolition) Hydraulic System Control Valve (Straight Travel)
314D CR Hydraulic Excavator C4.2 Engine Supplement Coolant Tank (Expansion) - Remove and Install
323D MHPU Mobile Hydraulic Power Unit Maintenance Interval Schedule
325D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Operator Controls
Procedure for Repairing Cracks at the Mounting Locations for the Grab Handles on Machines with Cabs{7301} Procedure for Repairing Cracks at the Mounting Locations for the Grab Handles on Machines with Cabs{7301}
390D Excavator Restricted Visibility
325D and 329D Excavators and 325D Material Handler Machine System Specifications Front Lines - Boom Cylinder
325D and 329D Excavators and 325D Material Handler Machine System Specifications Stick Cylinder
319D Excavator Machine System Specifications Bucket Cylinder Lines