2008/08/11 Caterpillar


New C18 Cylinder Liners and O-ring Seals are Used {1201, 1216, 1216}

Usage:

24M B9K
Motor Grader:
24M (S/N: B9K1-UP)
Cold Planer:
PM-200 (S/N: P1C1-UP)
PM-201 (S/N: PNM1-UP)
PM200 (S/N: P1M1-UP)
Landfill Compactor:
836H (S/N: BXD1-UP)
Excavator:
385C (S/N: EDA1-UP; MMA1-UP; KGB1-UP; KBC1-UP; SBE1-UP; T2E1-UP; T2F1-UP; KKK1-UP; EAM1-UP; JCM1-UP; WAW1-UP; MNZ1-UP)
Mobile Hydraulic Power Unit:
385C MHPU (S/N: MSF1-UP)
Off-Highway Truck/Tractor:
772 (S/N: RLB1-UP)
Track-Type Tractor:
D9T (S/N: RJS1-UP)
Underground Articulated Truck:
AD45B (S/N: CXM1-UP)
AD55 (S/N: DNW1-UP)
Wheel Dozer:
834H (S/N: BTX1-UP)
Wheel Loader:
988H (S/N: BXY1-UP)
Wheel Tractor-Scraper:
631G (S/N: DFA1-UP)
637G (S/N: DFJ1-UP)
657G (S/N: W1B1-UP; W1C1-UP)

Description of Change: Several improvements have been made to the profiles of the cylinder liner on the C18 engines in order to increase durability. Also, the two bottom cylinder liner seals are now the same part number.

Adaptable To: The new 322-1126 Cylinder Liner and the 155-2793 Liner Seal are adaptable to the serial numbers that are listed above.




Illustration 1g01622070

(1) Location of the two 155-2793 Liner Seals

Caterpillar Information System:

C4.2 and C6.4 Engines for Caterpillar Built Machines Fuel Injection Pump
345C Excavator (Ultra High Demolition) Hydraulic System Swing Hydraulic System
345C Excavator (Ultra High Demolition) Hydraulic System Cylinders (Boom, Stick and Bucket)
315D and 318D Excavators Machine System Specifications Solenoid Valve (Swing Motor)
323D Excavator Lifting Capacities
325C Excavator Machine Systems Sprocket - Remove and Install
Installation Procedure for 260-7984 Pilot Lines Gp (PILOT OIL PRESSURE){5057, 5059, 6307} Installation Procedure for 260-7984 Pilot Lines Gp (PILOT OIL PRESSURE){5057, 5059, 6307}
GLC85 Forestry Grapple Rotator Manifold Leakage - Test
GLC85 Forestry Grapple Hydraulic Rotator Cycle Time - Check
345C Excavator (Ultra High Demolition) Hydraulic System Control Valve (Stick Lowering)
GLC85 Forestry Grapple Rotator Manifold - Disassemble
GLC85 Forestry Grapple Rotator Manifold - Assemble
307D Excavator Engine Supplement Alternator - Remove and Install
345C Excavator (Ultra High Demolition) Hydraulic System Travel Hydraulic System
323D MHPU Mobile Hydraulic Power Unit Securing the Machine
307D Excavator Engine Supplement Refrigerant Compressor - Remove and Install
2008/08/11 Procedure is Available to Improve the Mounting Locations of the Grab Handle. {7301}
307D Excavator Machine Systems Check Valve (Cooler Bypass) - Remove
307D Excavator Machine Systems Check Valve (Cooler Bypass) - Install
323D MHPU Mobile Hydraulic Power Unit Capacities (Refill)
319D Excavator Machine System Specifications Boom - 5.3 m (17.39 ft)
2008/08/18 An Improved Stick Regeneration Valve is Now Available for Certain Excavators {5051}
325D and 329D Excavators and 325D Material Handler Machine System Specifications Stick - 7.85 m (25.755 ft)
345C Excavator (Ultra High Demolition) Hydraulic System Control Valve (Straight Travel)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.