Solenoid Valve (Swing Motor)
Show/hide table
| 图 1 | g01621869 |
(1) 两个螺栓的扭矩 ... 7.0 ± 0.7 N·m (60 ± 6 lb in)
(2) 三个管塞的扭矩 ... 7.0 ± 0.7 N·m (60 ± 6 lb in)
(3) 两只螺塞的扭矩 ... 25 ± 3 N·m (220 ± 27 lb in)
(4) 两只节流孔的扭矩 ... 10 ± 1 N·m (90 ± 9 lb in)
Caterpillar Information System:
323D Excavator Lifting Capacities
325C Excavator Machine Systems Sprocket - Remove and Install
Installation Procedure for 260-7984 Pilot Lines Gp (PILOT OIL PRESSURE){5057, 5059, 6307} Installation Procedure for 260-7984 Pilot Lines Gp (PILOT OIL PRESSURE){5057, 5059, 6307}
GLC85 Forestry Grapple Rotator Manifold Leakage - Test
GLC85 Forestry Grapple Hydraulic Rotator Cycle Time - Check
345C Excavator (Ultra High Demolition) Hydraulic System Control Valve (Stick Lowering)
GLC85 Forestry Grapple Rotator Manifold - Disassemble
GLC85 Forestry Grapple Rotator Manifold - Assemble
307D Excavator Machine Systems Undercarriage Frame - Remove
GLC85 Forestry Grapple Work Tool Preparation for Troubleshooting
307D Excavator Machine Systems Undercarriage Frame - Install
314D CR Hydraulic Excavator Machine Systems Main Control Valve - Assemble
345C Excavator (Ultra High Demolition) Hydraulic System Cylinders (Boom, Stick and Bucket)
345C Excavator (Ultra High Demolition) Hydraulic System Swing Hydraulic System
C4.2 and C6.4 Engines for Caterpillar Built Machines Fuel Injection Pump
2008/08/11 New C18 Cylinder Liners and O-ring Seals are Used {1201, 1216, 1216}
307D Excavator Engine Supplement Alternator - Remove and Install
345C Excavator (Ultra High Demolition) Hydraulic System Travel Hydraulic System
323D MHPU Mobile Hydraulic Power Unit Securing the Machine
307D Excavator Engine Supplement Refrigerant Compressor - Remove and Install
2008/08/11 Procedure is Available to Improve the Mounting Locations of the Grab Handle. {7301}
307D Excavator Machine Systems Check Valve (Cooler Bypass) - Remove
307D Excavator Machine Systems Check Valve (Cooler Bypass) - Install
323D MHPU Mobile Hydraulic Power Unit Capacities (Refill)