Valve Seat Inserts
Usage:
Remove & Install Valve Seat Inserts
Start By:
a. remove valves
1. Use Tooling (A) to remove the valve seat inserts from the cylinder head.
2. Clean and remove any burrs from the valve seat bores.
NOTE: For reconditioning information of the cylinder head, see Service Training Meeting Guide, SESV1202.
NOTE: The following steps are for the installation of the valve and inserts.
3. Lower the temperature of the new valve seat inserts. Use Tooling (B), and install the new valve seat inserts in the cylinder head.
End By:
a. install valves
Caterpillar Information System:
3406C GENERATOR SET ENGINE Inlet & Exhaust Valves
3406C GENERATOR SET ENGINE Spacer Plate
3406C GENERATOR SET ENGINE Cylinder Head Assembly
3406C GENERATOR SET ENGINE Aftercooler Housing
3406C GENERATOR SET ENGINE Aftercooler Core
3406C GENERATOR SET ENGINE Fuel Injection Nozzles & Adapters
3406C GENERATOR SET ENGINE Valve Lifters
3406C GENERATOR SET ENGINE Rocker Shaft Assemblies
3406C GENERATOR SET ENGINE Rocker Shaft Assemblies & Push Rods
3406C GENERATOR SET ENGINE Accessory Drive
3406C GENERATOR SET ENGINE Timing Gears & Plate
3406C GENERATOR SET ENGINE Timing Gear Cover
3406C GENERATOR SET ENGINE Bridge Dowels
3406C GENERATOR SET ENGINE Valve Guides
3406C GENERATOR SET ENGINE Oil Pan
3406C GENERATOR SET ENGINE Flywheel
3406C GENERATOR SET ENGINE Flywheel Housing
3406C GENERATOR SET ENGINE Oil Pump
3406C GENERATOR SET ENGINE Piston Cooling Tubes
3406C GENERATOR SET ENGINE Camshaft
3406C GENERATOR SET ENGINE Camshaft Bearings
3406C GENERATOR SET ENGINE Connecting Rod Bearings
3406C GENERATOR SET ENGINE Crankshaft Main Bearings
3406C GENERATOR SET ENGINE Crankshaft