New Hose Improves the Drainage of Oil from the Turbocharger During a Continuous Prelube Cycle {1052}
- Engine:
- 3508 (S/N: 95Y1-UP)
- G3508 (S/N: 4WD1-UP; 9TG1-UP; CTN1-UP)
- G3512 (S/N: 4KC1-UP; 5JD1-UP; 7NJ1-UP; CTM1-UP)
- G3516 (S/N: 3RC1-UP; 8LD1-UP; 4EK1-UP; CTL1-UP)
- G3516B (S/N: CEY1-UP; CTW1-UP)
- G3520B (S/N: GET1-UP; BGW1-UP; CTK1-UP)
Description of Change: A new hose is being used in the prelubrication lines in order to improve the flow of oil from the turbocharger to the oil pan.
Adaptable To: A new 210-6619 Hose As is being used in the prelubrication lines that are listed in a Table 1. The 210-6619 Hose As is a direct replacement for the former 2V-8571 Hose As. The 210-6619 Hose As has an inside diameter of 19.05 mm (0.750 inch). The former 2V-8571 Hose As has an inside diameter of 12.7 mm (0.50 inch).
Show/hide table
Affected Prelubrication Lines     |
113-4238 Prelubrication Lines     |
113-4239 Prelubrication Lines     |
153-1218 Prelubrication Lines     |
174-4107 Prelubrication Lines     |
190-8848 Prelubrication Lines     |
Show/hide table
Effectivity of the Engines     |
(S/N: 95Y01169-UP)     |
(S/N: 5JD00088-UP)     |
(S/N: 7NJ00882-UP)     |
(S/N: 4EK03719-UP)     |
(S/N: CEY00160-UP)     |
(S/N: 9TG00301-UP)     |
(S/N: 4WD00024-UP)     |
(S/N: 8LD00118-UP)     |
(S/N: 3RC01258-UP)     |
(S/N: BGW00131-UP)     |
(S/N: GET00105-UP)     |
(S/N: CTK00212-UP)     |
Caterpillar Information System:
2003/08/18 New Sleeve Bearings in the Oscillating Axle Trunnion Support Improve Service Life {3268, 7551}
Circuit Breaker Harness Assembly {1420} Circuit Breaker Harness Assembly {1420}
SW45 and SW60 Wheel Saws Frame (Front) - Remove and Install
321C LCR Excavator Machine Systems Control Manifold (Pilot Oil) - Assemble
321C LCR Excavator Machine Systems Control Manifold (Pilot Oil) - Disassemble
321C LCR Excavator Machine Systems Control Manifold (Pilot Oil) - Install
SW45 and SW60 Wheel Saws Hydraulic Cylinder (Sideshift) - Remove and Install
321C LCR Excavator Machine Systems Control Manifold (Pilot Oil) - Remove
320C Excavator Operation
330B L Excavator, 330B Forest Machine and 330B Material Handler Daily Inspection
330C Excavator Daily Inspection
322C Excavator Daily Inspection
3046 Engine for Caterpillar Built Machines Belt Tension Chart
C27 and C32 Generator Set Engines Camshaft Bearings - Remove
C27 and C32 Generator Set Engines Camshaft Bearings - Install
M322C Excavator Hydraulic System Hydraulic System - Setup - Combined Function Valve
321C LCR Excavator Machine Systems Drift Reduction Valve (Boom) - Install
321C LCR Excavator Machine Systems Drift Reduction Valve (Boom) - Remove
321C LCR Excavator Machine Systems Drift Reduction Valve (Stick) - Remove
321C LCR Excavator Machine Systems Drift Reduction Valve (Stick) - Install
SW45 and SW60 Wheel Saws Guide (Trench Cleaner) - Remove and Install
SW45 and SW60 Wheel Saws Cable (Trench Cleaner) - Remove and Install
SW45 and SW60 Wheel Saws Plate (Trench Cleaner) - Remove and Install
2003/07/28 Disregard theService Magazine , "Correction to Systems Operation Testing and Adjusting , "Engine Speed Control"" {1931}