Cylinder Liner - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 5P-8665 (1) | 缸套拉拔器总成 | 1 |
| B | 6V-9448 (2) | 气缸组拉拔器 | 1 |
Show/hide table
| ( 1 ) | 373-1438 气缸组拉拔器 是 C18 缸套的可选拆卸工具。 |
| ( 2 ) | 6V-9448 气缸组拉拔器 是 C15 缸套的拆卸工具。 |
开始:
- 拆下活塞和连杆。 请参阅拆解和组装, "活塞和连杆 - 拆卸"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 使用工具 (A) 拆卸缸套 (1) 。
Show/hide table
 | |
| 图 1 | g01111472 |
- 从缸套 (1) 上拆下缸套密封件 (3) 和加注口带箍 (2) 。
Caterpillar Information System:
C15 and C18 Generator Set Engines Cylinder Liner - Install
315C Excavator Machine Systems Front Idler, Recoil Spring and Hydraulic Track Adjuster - Remove
2003/09/01 New Engine Software is Available for the M300C Wheeled Excavators {1902, 7620}
2003/08/18 New Software is Available for the M300C Wheeled Excavators {7610, 7620}
SW45 and SW60 Wheel Saws Piston Motor - Install
SW45 and SW60 Wheel Saws Piston Motor - Remove
2003/08/18 New Software is Available for the M300C Wheeled Excavators {7601, 7620}
Standalone Installation of the Machine Security System (MSS) Medium Excavator{7631} Standalone Installation of the Machine Security System (MSS) Medium Excavator{7631}
C11 and C13 Engines for Caterpillar Built Machines Crankshaft - Remove
G310B, G315B and G320B Demolition and Sorting Grapples Hydraulic Cylinder - Remove and Install
SW45 and SW60 Wheel Saws Hydraulic Cylinder (Depth) - Remove and Install
2003/11/24 Remanufactured Improved Travel Motors With Increased Service Life Are Now Available {5058}
SW45 and SW60 Wheel Saws Hydraulic Cylinder (Trench Cleaner) - Remove and Install
322C Excavator Daily Inspection
330C Excavator Daily Inspection
330B L Excavator, 330B Forest Machine and 330B Material Handler Daily Inspection
320C Excavator Operation
321C LCR Excavator Machine Systems Control Manifold (Pilot Oil) - Remove
SW45 and SW60 Wheel Saws Hydraulic Cylinder (Sideshift) - Remove and Install
321C LCR Excavator Machine Systems Control Manifold (Pilot Oil) - Install
321C LCR Excavator Machine Systems Control Manifold (Pilot Oil) - Disassemble
321C LCR Excavator Machine Systems Control Manifold (Pilot Oil) - Assemble
SW45 and SW60 Wheel Saws Frame (Front) - Remove and Install
Circuit Breaker Harness Assembly {1420} Circuit Breaker Harness Assembly {1420}