Cylinder Liner - Install
安装步骤
Show/hide table
| 需要的工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件名称 | 数量 |
| B | 2P-8260 | 缸套安装工具 | 1 |
| C | 5P-3975 | 橡胶润滑剂 | 1 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 检查缸套突出量。 请参阅测试和调整, "缸套突出量 - 检查"。
- 将缸套密封 (3) 安装在缸套 (1) 上。
Show/hide table
 | |
| 图 1 | g01111530 |
- 缸套孔表面和缸套密封件上 (3) 使用工具 (C) 。
注: 不要使用机油、润滑脂或 Vaseline 作为缸套下密封的橡胶润滑剂。
- 把加注口带箍 (2) 在清洁的发动机机油中浸泡一会儿。 然后立刻将加注口带箍安装到缸套上。
- 使用工具 (B) 来把缸套 (1) 安装到缸体中。 确保一切与缸套凸出量有关的标记都要校准。
End By: 安装活塞和连杆。 请参阅 拆解和组装, "活塞和连杆 - 安装"。
Caterpillar Information System:
315C Excavator Machine Systems Front Idler, Recoil Spring and Hydraulic Track Adjuster - Remove
2003/09/01 New Engine Software is Available for the M300C Wheeled Excavators {1902, 7620}
2003/08/18 New Software is Available for the M300C Wheeled Excavators {7610, 7620}
SW45 and SW60 Wheel Saws Piston Motor - Install
SW45 and SW60 Wheel Saws Piston Motor - Remove
2003/08/18 New Software is Available for the M300C Wheeled Excavators {7601, 7620}
Standalone Installation of the Machine Security System (MSS) Medium Excavator{7631} Standalone Installation of the Machine Security System (MSS) Medium Excavator{7631}
C11 and C13 Engines for Caterpillar Built Machines Crankshaft - Remove
G310B, G315B and G320B Demolition and Sorting Grapples Hydraulic Cylinder - Remove and Install
SW45 and SW60 Wheel Saws Hydraulic Cylinder (Depth) - Remove and Install
2003/11/24 Remanufactured Improved Travel Motors With Increased Service Life Are Now Available {5058}
321C LCR Excavator Machine Systems Undercarriage Frame - Install
C15 and C18 Generator Set Engines Cylinder Liner - Remove
SW45 and SW60 Wheel Saws Hydraulic Cylinder (Trench Cleaner) - Remove and Install
322C Excavator Daily Inspection
330C Excavator Daily Inspection
330B L Excavator, 330B Forest Machine and 330B Material Handler Daily Inspection
320C Excavator Operation
321C LCR Excavator Machine Systems Control Manifold (Pilot Oil) - Remove
SW45 and SW60 Wheel Saws Hydraulic Cylinder (Sideshift) - Remove and Install
321C LCR Excavator Machine Systems Control Manifold (Pilot Oil) - Install
321C LCR Excavator Machine Systems Control Manifold (Pilot Oil) - Disassemble
321C LCR Excavator Machine Systems Control Manifold (Pilot Oil) - Assemble
SW45 and SW60 Wheel Saws Frame (Front) - Remove and Install