Boom Lighting - Remove and Install
- Disconnect harness assemblies (2). Note the orientation of the harness connections. Remove nut (3) and remove light (1).
Show/hide table
Illustration 1 | g01012485 |
- Position light (1) and install nut (3). Connect harness assemblies (2).
Show/hide table
Illustration 2 | g01012485 |
Caterpillar Information System:
M325C Material Handler Operation Information
315C Excavator Machine Systems Bucket Cylinder - Remove and Install
C4.4 Industrial Engine Increased Engine Oil Temperature - Inspect
C11 and C13 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
M325C Material Handler Fuel System Water Separator Element - Replace
M325C Material Handler Final Drive Oil Level - Check
M325C Material Handler Final Drive Oil Sample - Obtain
C11 and C13 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
321C CR Excavator Engine Supplement Fan - Remove and Install
321C CR Excavator Engine Supplement Muffler - Remove and Install
321C CR Excavator Engine Supplement Fan Guard - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
M325C Material Handler Final Drive Oil - Change
321C LCR Excavator Machine Systems Pilot Valve (Travel) - Remove
321C LCR Excavator Machine Systems Pilot Valve (Travel) - Install
321C LCR Excavator Machine Systems Pilot Valve (Joystick) - Remove
321C LCR Excavator Machine Systems Pilot Valve (Joystick) - Install
315C Excavator Machine Systems Stick Cylinder - Remove and Install
2003/08/18 A New Egress Ladder is Used {7254, 7255}
345B Excavator Hydraulic System Counterweight (Removal and Installation Hydraulic System)
315C Excavator Machine Systems Boom Cylinder - Remove and Install
M325D MH Material Handler Window Washer Reservoir - Fill
2003/09/15 An Improved Alternator Belt is Used {1357}
2003/10/01 An Improved Alternator Belt is Used {1357}