Muffler - Remove and Install
Removal Procedure
Start By:
- Remove the counterweight. Refer to Disassembly and Assembly, "Counterweight - Remove and Install".
- Remove the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
- Remove bolts (2) and panel assembly (1) .
Show/hide table
Illustration 1 | g01012051 |
- Remove bolts (3) and panel assembly (4) .
Show/hide table
Illustration 2 | g01012053 |
- Remove bolts (5) .
Show/hide table
Illustration 3 | g01012054 |
- Remove bolts (6) and bracket assembly (7) .
Show/hide table
Illustration 4 | g01012055 |
- Remove bolts (8) .
Show/hide table
Illustration 5 | g01012056 |
- Remove bolts (10) and guard assembly (9) .
Show/hide table
Illustration 6 | g01012057 |
- Loosen bolts (13). Remove nuts (11) .
Show/hide table
Illustration 7 | g01012058 |
- Reposition tube assembly (12) .
- Disconnect nut (14) and tube assembly (15) from the muffler.
Show/hide table
Illustration 8 | g01012059 |
- Remove bolts (16). Remove the muffler from the machine. The weight of the muffler is approximately 25 kg (55 lb).
Show/hide table
Illustration 9 | g01012060 |
Installation Procedure
- Position the muffler onto the machine and install bolts (16). The weight of the muffler is approximately 25 kg (55 lb).
Show/hide table
Illustration 10 | g01012060 |
- Connect nut (14) and tube assembly (15) onto the muffler.
Show/hide table
Illustration 11 | g01012059 |
- Reposition tube assembly (12) and install nuts (11) .
Show/hide table
Illustration 12 | g01012058 |
- Tighten bolts (13) .
- Position guard assembly (9) and install bolts (10) .
Show/hide table
Illustration 13 | g01012057 |
- Install bolts (8) .
Show/hide table
Illustration 14 | g01012056 |
- Position bracket assembly (7) and install bolts (6) .
Show/hide table
Illustration 15 | g01012055 |
- Install bolts (5) .
Show/hide table
Illustration 16 | g01012054 |
- Position panel assembly (4) and install bolts (3) .
Show/hide table
Illustration 17 | g01012053 |
- Position panel assembly (1) and install bolts (2) .
Show/hide table
Illustration 18 | g01012051 |
End By:
- Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
- Install the counterweight. Refer to Disassembly and Assembly, "Counterweight - Remove and Install".
Caterpillar Information System:
321C CR Excavator Engine Supplement Fan Guard - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
PC404 Cold Planer Work Tool Troubleshooting Information
2003/08/11 The Reliability of the Backup Alarm Assembly Is Improved {7429}
2003/12/22 The Addition of a Heat Shield Plate Protects the Engine Valve Cover {1061, 1062, 1107}
321C CR Excavator Engine Supplement Turbocharger - Install
321C CR Excavator Engine Supplement Turbocharger - Remove
322C Forest Machine Machine System Specifications Heel Cylinder
5110B Excavator Air Conditioning and Heating Actuator (Air Flow Control)
C11 and C13 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
C11 and C13 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
C11 and C13 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
321C CR Excavator Engine Supplement Fan - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
M325C Material Handler Final Drive Oil Sample - Obtain
M325C Material Handler Final Drive Oil Level - Check
M325C Material Handler Fuel System Water Separator Element - Replace
C11 and C13 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C4.4 Industrial Engine Increased Engine Oil Temperature - Inspect
315C Excavator Machine Systems Bucket Cylinder - Remove and Install
M325C Material Handler Operation Information
321C LCR Excavator Machine Systems Boom Lighting - Remove and Install
M325C Material Handler Final Drive Oil - Change
321C LCR Excavator Machine Systems Pilot Valve (Travel) - Remove