Fan Guard - Remove and Install
Removal Procedure
Start By:
- Remove the counterweight. Refer to Disassembly and Assembly, "Counterweight - Remove and Install".
- Remove bolts (1) and guard assembly (2) .
Show/hide table
 | |
| Illustration 1 | g01011923 |
- Remove bolts (3) and guard assembly (4) .
Show/hide table
 | |
| Illustration 2 | g01011924 |
Installation Procedure
- Position guard assembly (4) and install bolts (3) .
Show/hide table
| | |
| Illustration 3 | g01011924 |
- Position guard assembly (2) and install bolts (1) .
Show/hide table
| | |
| Illustration 4 | g01011923 |
End By: Install the counterweight. Refer to Disassembly and Assembly, "Counterweight - Remove and Install".
Caterpillar Information System:
C11 and C13 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
PC404 Cold Planer Work Tool Troubleshooting Information
2003/08/11 The Reliability of the Backup Alarm Assembly Is Improved {7429}
2003/12/22 The Addition of a Heat Shield Plate Protects the Engine Valve Cover {1061, 1062, 1107}
321C CR Excavator Engine Supplement Turbocharger - Install
321C CR Excavator Engine Supplement Turbocharger - Remove
322C Forest Machine Machine System Specifications Heel Cylinder
5110B Excavator Air Conditioning and Heating Actuator (Air Flow Control)
C11 and C13 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
C11 and C13 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
C11 and C13 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
M325C Material Handler Axle Oil Sample - Obtain - Front
321C CR Excavator Engine Supplement Muffler - Remove and Install
321C CR Excavator Engine Supplement Fan - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
M325C Material Handler Final Drive Oil Sample - Obtain
M325C Material Handler Final Drive Oil Level - Check
M325C Material Handler Fuel System Water Separator Element - Replace
C11 and C13 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C4.4 Industrial Engine Increased Engine Oil Temperature - Inspect
315C Excavator Machine Systems Bucket Cylinder - Remove and Install
M325C Material Handler Operation Information
321C LCR Excavator Machine Systems Boom Lighting - Remove and Install
M325C Material Handler Final Drive Oil - Change