Pump Drive
Usage:
Remove and Install Pump Drive (Power Steering)
Start By:
a. remove fuel transfer pump
1. Remove the washers, three bolts (2) and one nut (3) that hold pump drive (1) to the timing gear plate.
2. Use a soft hammer to remove (push) pump drive (1) and bearing (7) out of the timing gear cover and the timing gear plate.
3. Remove three bolts (4).
4. Remove bearings (7) and gear (6) from housing (1) as a unit.
5. Remove O-ring seal (5) from housing (1).
NOTE: Check the condition of all components. Use new parts for replacement of any worn or damaged components
6. Install pump drive (1) in the reverse order of removal.
End By:
a. Install the fuel transfer pump
Caterpillar Information System:
3406E TRUCK ENGINE Timing Gears and Plate
3406E TRUCK ENGINE Timing Gear Cover
3406E TRUCK ENGINE Vibration Damper and Pulley
3406E TRUCK ENGINE Engine Front Support
3406E TRUCK ENGINE Fan Drive
3406E TRUCK ENGINE Water Pump
3406E TRUCK ENGINE Exhaust Manifold
3406E TRUCK ENGINE Oil Filter and Base
3406E TRUCK ENGINE Engine Oil Cooler
3406E TRUCK ENGINE Water Temperature Regulators
3406E TRUCK ENGINE Turbocharger
3406E TRUCK ENGINE Electric Starting Motor
3406E TRUCK ENGINE Valve Covers
3406E TRUCK ENGINE Valve Cover Base
3406E TRUCK ENGINE Rocker Arm and Shaft Assemblies
3406E TRUCK ENGINE Cylinder Head Assembly
3406E TRUCK ENGINE Spacer Plate
3406E TRUCK ENGINE Valve Springs
3406E TRUCK ENGINE Inlet and Exhaust Valves
3406E TRUCK ENGINE Valve Seals
3406E TRUCK ENGINE Valve Seat Inserts
3406E TRUCK ENGINE Valve Guides
3406E TRUCK ENGINE Oil Pan
3406E TRUCK ENGINE Flywheel