Manual Barring Group - Disassemble
拆解步骤
开始:
- 拆下手动盘机总成。 请参阅拆解和组装, "手动盘机总成 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将旋钮 (13) 和螺母 (12) 从杆 (14) 上拆下。
Show/hide table
图 1 | g00562622 |
- 从托架组件卸下导向装置 (11) 、杆 (14) 和弹簧 (9) 。
- 从轴 (6) 卸下环 (8) 、垫圈 (10) 和弹簧 (4) 。
- 拆下导向装置 (3) 和导向装置后部的隔套。
- 从支架组件上拆下轴 (6) 。
- 从轴 (6) 上拆卸 O 形密封圈 (15) 。
- 从轴卸下螺栓 (7) 、垫圈 (5) 、小齿轮 (2) 及护圈 (1) 。
Caterpillar Information System:
3600 Heavy Fuel Engines Gauges and Indicators
G3408 and G3412 Engines Fuel System
3412E, C30 and C32 Marine Engines Flywheel - Remove
G3408 and G3412 Engines Ignition System
3600 Heavy Fuel Engines Model View Illustrations
G3408 and G3412 Engines Air Starting System
G3408 and G3412 Engines Electrical System
G3606 and G3608 Engines Manual Barring Group - Install
G3408 and G3412 Engines Basic Block
G3408 and G3412 Engines Cooling System
G3606 and G3608 Engines Manual Barring Group - Remove
G3408C, G3412C, G3508, G3512 and G3516 Gas Engine Driven Chillers Sensors
G3408C, G3412C, G3508, G3512 and G3516 Gas Engine Driven Chillers Control Panel (Engine)
G3606 and G3608 Engines Manual Barring Group - Assemble
G3408 and G3412 Engines Air Inlet And Exhaust System
G3606 and G3608 Engines Housing (Rear) - Remove
G3606 and G3608 Engines Housing (Rear) - Install
G3408 and G3412 Engines Governor Adjustment Procedure
G3408 and G3412 Engines Lubrication System
3412E, C30 and C32 Marine Engines Flywheel - Install
G3606 and G3608 Engines Flywheel and Coupling Guards - Remove and Install
G3408 and G3412 Engines Cooling System
Generator Set Control Panel for Switchgear Conversion CID 0100 FMI 08 Pressure Sensor (Engine Oil) Abnormal Signal - Test
3600 Distillate Fuel Engines Engine Power Ratings