Flywheel - Remove
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 9S-9082 | Engine Turning Tool | 1 |
B | - | 5/8 inch - 18 NF by 10 inch Guide Bolt | 2 |
C | 138-7575 | Link Bracket | 1 |
Start By:
- Remove the electric starting motor. Refer to Disassembly and Assembly, "Electric Starting Motor - Remove and Install".
- Remove speed sensor (1) from flywheel housing (2).
Show/hide table
Illustration 2 g01094179 - Use Tooling (A) in order to position one of eight holes (4) toward the top of flywheel (3).
- Remove two bolts (5) from flywheel (3).
- Install Tooling (B) and remove remaining bolts (5) from flywheel (3).
- Attach Tooling (C) and a suitable lifting device to flywheel (3). Remove flywheel (3). The weight of flywheel (3) is approximately
54 kg (120 lb) .Show/hide tableIllustration 3 g01094183 - Use a brass punch in order to remove ring gear (6) from flywheel (3).
Show/hide table
Illustration 1 | g00888403 |
Caterpillar Information System:
G3408 and G3412 Engines Ignition System
3600 Heavy Fuel Engines Model View Illustrations
G3408 and G3412 Engines Air Starting System
G3408 and G3412 Engines Electrical System
G3606 and G3608 Engines Manual Barring Group - Install
G3408 and G3412 Engines Basic Block
G3408 and G3412 Engines Cooling System
G3606 and G3608 Engines Manual Barring Group - Remove
G3408C, G3412C, G3508, G3512 and G3516 Gas Engine Driven Chillers Sensors
797 Off-Highway Truck Hydraulic System Solenoid Valve (Hoist Pilot)
PM3412C Power Modules Stopping the Engine
Digital Voltage Regulator Cross Current Compensation
G3408 and G3412 Engines Fuel System
3600 Heavy Fuel Engines Gauges and Indicators
G3606 and G3608 Engines Manual Barring Group - Disassemble
G3408C, G3412C, G3508, G3512 and G3516 Gas Engine Driven Chillers Control Panel (Engine)
G3606 and G3608 Engines Manual Barring Group - Assemble
G3408 and G3412 Engines Air Inlet And Exhaust System
G3606 and G3608 Engines Housing (Rear) - Remove
G3606 and G3608 Engines Housing (Rear) - Install
G3408 and G3412 Engines Governor Adjustment Procedure
G3408 and G3412 Engines Lubrication System
3412E, C30 and C32 Marine Engines Flywheel - Install
G3606 and G3608 Engines Flywheel and Coupling Guards - Remove and Install