Engine Oil Filter Base
Show/hide table
Illustration 1 | g03320444 |
Show/hide table
Specification for 6N-0936 Engine Oil Filter Gp | |||
Item | Qty | Part | Specification Description |
1 | 2 | 2P-4304 Hollow Stud | Before assembly, apply red Loctite 271 on tapered end of the hollow stud to the length of Torque to |
2 | 2 | 1R-1808 Engine Oil Filter | Use the following procedure in order to tighten the engine oil filter: 1. Apply clean engine oil to the oil filter seal. 2. Place the oil filter in position. 3. Turn the oil filter by hand until the seal contact with the base. 4. Additionally tighten the oil filter by one full turn. |
3 | 2 | 4N-8150 Spring | Length under test force is Test force is Free length after test is |
- | - | - | Nominal opening pressure for oil filter bypass valve is Nominal closing pressure for oil filter bypass valve is |
Caterpillar Information System:
3306C Engines for Caterpillar Built Machines Water Pump
3306B Industrial Engine Shutoff And Alarm System Components
3306B Industrial Engine Fan Drive - Install
3306B Industrial Engine Instruments and Indicators
3406E On-Highway Engine Camshaft - Install
3306B Industrial Engine Time Delay Relay
3306B Industrial Engine Electric Shutoff System
3306B Industrial Engine Rear Power Take-Off (RPTO)
3306B Industrial Engine Shutoff and Alarm System
3306B Industrial Engine Instrument Panel
3306C Truck Engine Vibration Damper and Pulley - Remove and Install
3208 Marine Engine Alternator - Inspect
3600 Heavy Fuel Engines Sensors and Electrical Components
3306B Industrial Engine Crankshaft Front Seal - Install
3304B and 3306B Engines for Caterpillar Built Machines Crankshaft Rear Seal - Install
3306C Engines for Caterpillar Built Machines Valve Rocker Arms and Lifters
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pump
3406E On-Highway Engine Camshaft Bearings - Remove
3600 Heavy Fuel Engines Magnetic Pickups - Clean/Inspect
3306B Industrial Engine Gauges and Indicators
3406C Engines for Caterpillar Built Machines Water Pump
3306B Industrial Engine Cold Weather Starting
G3300 Engines Ignition Systems
3408B and 3408C Industrial and Marine Engines Gear Group (Rear)