Alternator - Inspect
注: 本发动机配备了一个交流发电机断路器。 留意针对您的具体应用的交流发电机断路器的位置。 如果交流发电机断路器跳断,您将需要范围断路器以便使充电系统恢复工作。 更多有关资料,请参阅原设备制造厂(OEM)提供的资料。
卡特彼勒建议定期检查交流发电机。 检查交流发电机接头是否松动以及蓄电池是否正常充电。 在发动机运行期间,检查电流表(如有配备),以确保蓄电池和/或电气系统的正常工作性能。 必要时进行修理。 请参阅维修手册。
检查交流发电机和蓄电池充电器工作是否正常。 如果蓄电池充电正常,电流表读数应该几乎为零。 所有蓄电池都应保持充电状态。 蓄电池应保暖,因为温度会影响盘机能力。 如果蓄电池太冷,蓄电池将无法盘机。 太冷的蓄电池,即使发动机在热态也不能盘机。 当发动机长时间不运转或只是短时间运转时,蓄电池可能未充足电。 充电低的蓄电池比充足电的蓄电池更容易冻结。
Caterpillar Information System:
3408C, 3412C and 3412D High Performance Marine Engines Auxiliary Water Pump
3126 Truck Engine Engine Oil Temperature Sensor
3408E and 3412E Industrial Engines Coolant Level Sensor
3406E Truck Engines Accelerator Pedal Position Sensor
3176C and 3196 Engines for Caterpillar Built Machines Fuel System
3406E and 3456 Engines for Caterpillar Built Machines Fuel Pressure Sensor
3306B Industrial Engine Air Inlet And Exhaust System
3054 Engine Crankshaft Seals
3306B Industrial Engine Fan Drive - Remove
3412E and C30 Engines Alternator and Regulator
3406E On-Highway Engine Camshaft - Remove
3306B Industrial Engine Fan - Remove and Install
3306C Truck Engine Vibration Damper and Pulley - Remove and Install
3306B Industrial Engine Instrument Panel
3306B Industrial Engine Shutoff and Alarm System
3306B Industrial Engine Rear Power Take-Off (RPTO)
3306B Industrial Engine Electric Shutoff System
3306B Industrial Engine Time Delay Relay
3406E On-Highway Engine Camshaft - Install
3306B Industrial Engine Instruments and Indicators
3306B Industrial Engine Fan Drive - Install
3306B Industrial Engine Shutoff And Alarm System Components
3306C Engines for Caterpillar Built Machines Water Pump
3408C, 3412C and 3412D High Performance Marine Engines Engine Oil Filter Base