PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING, IF NECESSARY, VARIOUS CHECK VALVE ASSEMBLIES FROM DEALER PARTS STOCK
Usage:
REBE6345-00
Show/hide table
| 28Jul2010 |
U-277
A-212
D-237
O-240
Show/hide table
| Parts stock action only | PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING, IF NECESSARY, VARIOUS CHECK VALVE ASSEMBLIES FROM DEALER PARTS STOCK |
|
| 7750 | PI70349 |
|
Show/hide table
| NOTE: | When submitting claim for Parts Stock Action, Use the appropriate 99Z as the s/n, the appropriate Service Letter Program Number as the Part number in the Part Causing Failure field, "7751" as the Group Number, "56" as the Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Oct2010 |
PROBLEM
Show/hide table
| The poppet within the existing check valves may have missed a drilling process. If the poppet does not contain flow holes, the check valve will not function properly. |
ACTION REQUIRED
Show/hide table
| Inspect all check valves that are listed in Image 1 for flow holes in the poppet. Shine a bright light from the end and observe for the presence of flow holes. Refer to Images 2, 3, 4, and 5. - If there are no flow holes observed in the poppet, remove the check valve from dealer parts stock. - If there are flow holes observed in the poppet return the check valve to the original packaging, mark the package to indicate the check valve has been inspected according to this program (PI7#### / REBE6345), and return the part to dealer part stock. Image 4 is an example of a poppet with flow holes. |
Show/hide table
 |
| Image1 |
 |
| Image2 |
 |
| Image3 |
 |
| Image4 |
 |
| Image5 |
SERVICE CLAIM ALLOWANCES
Show/hide table
| Submit one claim for all check valves inspected. 0.5 hours will be allowed for every 5 check valves that are inspected. Example: - Five check valves inspected = 0.5 hour claim - Ten check valves inspected = 1.0 hour claim |
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING THE MACHINE SOFTWARE ON CERTAIN 312D EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING THE MACHINE SOFTWARE ON CERTAIN 312D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR RE-INSTALLING THE ENGINE COOLING FAN MAP ON CERTAIN 320D AND 323D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR RE-INSTALLING THE ENGINE COOLING FAN MAP ON CERTAIN 320D AND 323D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING AN EXTERNAL SEAL KIT BETWEEN THE ENGINE OIL PAN AND CRANK CASE ON CERTAIN 303C CR AND 303.5C CR EXCAVATORS PRODUCT SUPPORT PROGRAM FOR INSTALLING AN EXTERNAL SEAL KIT BETWEEN THE ENGINE OIL PAN AND CRANK CASE ON CERTAIN 303C CR AND 303.5C CR EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR RELOCATING THE CONNECTOR FOR THE ENGINE OIL LEVEL SWITCH ON CERTAIN 345D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR RELOCATING THE CONNECTOR FOR THE ENGINE OIL LEVEL SWITCH ON CERTAIN 345D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR MODIFICATIONS IN THE SWING PILOT CIRCUIT IN ORDER TO PREVENT JOYSTICK VIBRATION ON CERTAIN 345D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR MODIFICATIONS IN THE SWING PILOT CIRCUIT IN ORDER TO PREVENT JOYSTICK VIBRATION ON CERTAIN 345D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE HVAC DUCTS ON CERTAIN 320C, 320D, 322C, 324D, 325C, 325D, 330C, AND 330D FORESTRY MACHINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE HVAC DUCTS ON CERTAIN 320C, 320D, 322C, 324D, 325C, 325D, 330C, AND 330D FORESTRY MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE VISCOUS FAN DRIVE ASSEMBLY ON CERTAIN 324D, 325D, 328D, AND M325D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE VISCOUS FAN DRIVE ASSEMBLY ON CERTAIN 324D, 325D, 328D, AND M325D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM/STICK/BUCKET HYDRAULIC CYLINDER BARREL ON CERTAIN 320D AND 324D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM/STICK/BUCKET HYDRAULIC CYLINDER BARREL ON CERTAIN 320D AND 324D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING, IF NECESSARY, THE UPPER FRAME ON CERTAIN M313D, M315D, M316D, AND M318D WHEELED EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING, IF NECESSARY, THE UPPER FRAME ON CERTAIN M313D, M315D, M316D, AND M318D WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE MAIN HYDRAULIC PUMP ON CERTAIN 330D, 330D L, 330D MH, 345C, 345C L, AND 345C MH HYDRAULIC EXCAVATORS IN THE CASE OF LOOSE SERVO PISTON. PRODUCT SUPPORT PROGRAM FOR REWORKING THE MAIN HYDRAULIC PUMP ON CERTAIN 330D, 330D L, 330D MH, 345C, 345C L, AND 345C MH HYDRAULIC EXCAVATORS IN THE CASE OF LOOSE SERVO PISTON.
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN ROCKER SWITCHES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN ROCKER SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY RETIGHTENING THE DRIVE GEAR ON CERTAIN 0R3233, 0R3860, AND 0R9250 ENGINE OIL SCAVENGE PUMPS IN DEALER PARTS STOCK FOR INSTALLATION IN VARIOUS 3508, 3512, AND 3516 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY RETIGHTENING THE DRIVE GEAR ON CERTAIN 0R3233, 0R3860, AND 0R9250 ENGINE OIL SCAVENGE PUMPS IN DEALER PARTS STOCK FOR INSTALLATION IN VARIOUS 3508, 3512, AND 3516 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEALS IN THE SWIVELS ON VARIOUS HYDRO-MECHANICAL WORK TOOLS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEALS IN THE SWIVELS ON VARIOUS HYDRO-MECHANICAL WORK TOOLS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING DEFECTIVE 353-5263, 353-5264, AND 353-5265 SEALS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING DEFECTIVE 353-5263, 353-5264, AND 353-5265 SEALS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CAPTIVE FASTENERS ON THE COOLING FAN GUARD GROUP ON CERTAIN M313D, M315D, M316D, M318D, M318D MH, M322D, AND M322D MH WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE CAPTIVE FASTENERS ON THE COOLING FAN GUARD GROUP ON CERTAIN M313D, M315D, M316D, M318D, M318D MH, M322D, AND M322D MH WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR DISPENSING FUEL SYSTEM CLEANER ON VARIOUS 311D, 312D, 314D, 315D, 319D, 320D, 321D, AND 323D HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR DISPENSING FUEL SYSTEM CLEANER ON VARIOUS 311D, 312D, 314D, 315D, 319D, 320D, 321D, AND 323D HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL ON THE BOOM PRESSURE SENSOR ON CERTAIN 345D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL ON THE BOOM PRESSURE SENSOR ON CERTAIN 345D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FINAL DRIVE MOTOR HOUSING ON CERTAIN 385C, 385C L, AND 385C FS EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FINAL DRIVE MOTOR HOUSING ON CERTAIN 385C, 385C L, AND 385C FS EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING THE 1" XT-6 ES (161-1836) AND XT-6 TOUGH GUARD (238-8347) BULK HOSE FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING THE 1" XT-6 ES (161-1836) AND XT-6 TOUGH GUARD (238-8347) BULK HOSE FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL FILTRATION SYSTEM ON CERTAIN 320D HYDRAULIC EXCAVATORS EQUIPPED WITH C6.4 ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL FILTRATION SYSTEM ON CERTAIN 320D HYDRAULIC EXCAVATORS EQUIPPED WITH C6.4 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY RETURNING 0R4943, 0R8777, 0R8778, AND 0R9847 REMAN CYLINDER PACKS IN DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY RETURNING 0R4943, 0R8777, 0R8778, AND 0R9847 REMAN CYLINDER PACKS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REPLACING, IF NECESSARY, THE 245-9359 RADIATOR CORE ASSEMBLY ON CERTAIN 336D AND 336D L OEM EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REPLACING, IF NECESSARY, THE 245-9359 RADIATOR CORE ASSEMBLY ON CERTAIN 336D AND 336D L OEM EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK LOWERING CHECK VALVE PILOT AND DRAIN PIPES ON CERTAIN 319D TRACK EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK LOWERING CHECK VALVE PILOT AND DRAIN PIPES ON CERTAIN 319D TRACK EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REPLACING, IF NECESSARY, THE FINAL DRIVE ON CERTAIN 329D EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REPLACING, IF NECESSARY, THE FINAL DRIVE ON CERTAIN 329D EXCAVATORS