PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC TANK ON CERTAIN 330D, 330DL, AND 336DL EXCAVATORS
Usage:
REBE5785-00
Show/hide table
| 16Apr2010 |
U-128
A-105
D-111
O-119
Show/hide table
| After Failure Only | PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC TANK ON CERTAIN 330D, 330DL, AND 336DL EXCAVATORS |
|
| 5056 | PS51828 |
|
Show/hide table
| NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS51828" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 30Apr2013 |
PROBLEM
Show/hide table
| The weld for the hydraulic tank can crack on certain 330D, 330DL, and 336DL Excavators. If the weld cracks, this can lead to oil leaks. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 330D | JJM00222-00223 |
| 330D FM | L2K00215-00228, 1300-1302 |
| 330D FM BUTT N | E4K00236-00238, 350-364 |
| 330D FM HEEL | H3K00225-00234, 350-371, 1400-1406 |
| 330D L | MWP00181-03385 R2D00201-00284 |
| 330D MH FCR | LEM00186-00260, 20101 |
| 330D MH HCR | C5K00220-00228 |
| 336D L | J2F00151-00197 W3K00201-00845 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 2895565 | TANK GP-HYD |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 1% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. | ||
ACTION REQUIRED
Show/hide table
| If there are leaks from the hydraulic tank weld and cracks are detected, replace the hydraulic tank with a new 289-5565 Hydraulic Tank. Refer to Disassembly and Assembly Manual, RENR8648, for the remove and install procedure. Use clean equipment and follow contamination control procedures when draining, storing and refilling the hydraulic oil. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
0-24 mo |
||||||
25-48 mo |
||||||
Show/hide table
| NOTE: This is a 8.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PIN FROM THE BOOM TO THE BOOM CYLINDERS (PT2 PIN) ON CERTAIN 320D, 323D, 330D AND 336D HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE PIN FROM THE BOOM TO THE BOOM CYLINDERS (PT2 PIN) ON CERTAIN 320D, 323D, 330D AND 336D HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPAIRING D3:C4 NAV 10.4 DISPLAYS (239-9531, 239-9532, 236-2534, 277-0493, OR 291-2199) ON MACHINES THAT ARE EQUIPPED WITH COMPUTER AIDED EARTHMOVING SYSTEM (CAES) OR AQUILA DRILL & DRAGLINE SYSTEMS PRODUCT SUPPORT PROGRAM FOR REPAIRING D3:C4 NAV 10.4 DISPLAYS (239-9531, 239-9532, 236-2534, 277-0493, OR 291-2199) ON MACHINES THAT ARE EQUIPPED WITH COMPUTER AIDED EARTHMOVING SYSTEM (CAES) OR AQUILA DRILL & DRAGLINE SYSTEMS
PRODUCT SUPPORT PROGRAM FOR REPAIRING D3:C4 NAV 10.4 DISPLAYS (239-9531, 239-9532, 236-2534, 277-0493, OR 291-2199) ON MACHINES THAT ARE EQUIPPED WITH COMPUTER AIDED EARTHMOVING SYSTEM (CAES) OR AQUILA DRILL & DRAGLINE SYSTEMS PRODUCT SUPPORT PROGRAM FOR REPAIRING D3:C4 NAV 10.4 DISPLAYS (239-9531, 239-9532, 236-2534, 277-0493, OR 291-2199) ON MACHINES THAT ARE EQUIPPED WITH COMPUTER AIDED EARTHMOVING SYSTEM (CAES) OR AQUILA DRILL & DRAGLINE SYSTEMS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SLOW RETURN CHECK VALVE ON CERTAIN 345D L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SLOW RETURN CHECK VALVE ON CERTAIN 345D L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING EXHAUST MANIFOLD ON CERTAIN M316D, M318D, M318D MH, M322D, AND M322D MH WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR INSTALLING EXHAUST MANIFOLD ON CERTAIN M316D, M318D, M318D MH, M322D, AND M322D MH WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING PISTON RINGS IN C9 ENGINES THAT ARE DEMONSTRATING HIGH OIL CONSUMPTION ON CERTAIN 330D AND 336D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING PISTON RINGS IN C9 ENGINES THAT ARE DEMONSTRATING HIGH OIL CONSUMPTION ON CERTAIN 330D AND 336D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VISCOUS FAN DRIVE ASSEMBLY ON CERTAIN 320D, 321D AND 323D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE VISCOUS FAN DRIVE ASSEMBLY ON CERTAIN 320D, 321D AND 323D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED BRACKETS FOR MOUNTING THE ACCUMULATORS ON THE BOOM DAMPENING SYSTEM ON CERTAIN M318C, M322C, M318D AND M322D MATERIAL HANDLERS PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED BRACKETS FOR MOUNTING THE ACCUMULATORS ON THE BOOM DAMPENING SYSTEM ON CERTAIN M318C, M322C, M318D AND M322D MATERIAL HANDLERS
PRODUCT SUPPORT PROGRAM FOR UPGRADING PL300 ECM VERSION 3.0 SOFTWARE ON PRODUCT LINK PL321 SYSTEMS ON CERTAIN MACHINES PRODUCT SUPPORT PROGRAM FOR UPGRADING PL300 ECM VERSION 3.0 SOFTWARE ON PRODUCT LINK PL321 SYSTEMS ON CERTAIN MACHINES
PRODUCT IMPROVEMENT PROGRAM FOR REROUTING THE STARTER CABLE AND THE ENGINE OIL HOSES ON CERTAIN 330D AND 336D EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REROUTING THE STARTER CABLE AND THE ENGINE OIL HOSES ON CERTAIN 330D AND 336D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING MONITOR SOFTWARE ON CERTAIN M313D, M315D, M316D, M318D, M318D MH, M322D AND M322D MH WHEELED EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING MONITOR SOFTWARE ON CERTAIN M313D, M315D, M316D, M318D, M318D MH, M322D AND M322D MH WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE TRAVEL COMPENSATORS IN THE MAIN CONTROL VALVE ON CERTAIN 385 C L, 385C FS AND 385C MH EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE TRAVEL COMPENSATORS IN THE MAIN CONTROL VALVE ON CERTAIN 385 C L, 385C FS AND 385C MH EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE CABLE AT THE GREASE PUMP ON CERTAIN M318D AND M322D MATERIAL HANDLERS EQUIPPED WITH THE AUTOMATIC LUBRICATION SYSTEM PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE CABLE AT THE GREASE PUMP ON CERTAIN M318D AND M322D MATERIAL HANDLERS EQUIPPED WITH THE AUTOMATIC LUBRICATION SYSTEM
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 212-3086, 212-3088, 195-5583, 195-5580 AND 195-5481 LINKAGE PIN ASSEMBLIES ON CERTAIN 345C, 345C L, 345D L, 365C L, 385C AND 385C L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 212-3086, 212-3088, 195-5583, 195-5580 AND 195-5481 LINKAGE PIN ASSEMBLIES ON CERTAIN 345C, 345C L, 345D L, 365C L, 385C AND 385C L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RIGHT HAND SIDE WINDOW IN THE CAB WITH A POLYCARBONATE WINDOW ON CERTAIN 365B L II, 365B L II FS, 365C L, 365C L FS, 365C L OEM, 385B, 385B L, 385C, 385C FS, 385C L AND 385C OEM EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RIGHT HAND SIDE WINDOW IN THE CAB WITH A POLYCARBONATE WINDOW ON CERTAIN 365B L II, 365B L II FS, 365C L, 365C L FS, 365C L OEM, 385B, 385B L, 385C, 385C FS, 385C L AND 385C OEM EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL TANK ON CERTAIN M313C, M313D, M315C, M315D, M316C, M316D, M318C, M318D, M322C, M322D, M318C MH, M318D MH, M322C, MH AND M322D MH WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL TANK ON CERTAIN M313C, M313D, M315C, M315D, M316C, M316D, M318C, M318D, M322C, M322D, M318C MH, M318D MH, M322C, MH AND M322D MH WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING A CONNECTOR IN THE SWING PILOT CIRCUIT ON CERTAIN 324D, 325D, 329D, 330D, 336D, 325D MH AND 330D MH EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING A CONNECTOR IN THE SWING PILOT CIRCUIT ON CERTAIN 324D, 325D, 329D, 330D, 336D, 325D MH AND 330D MH EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REACH STICK, IF CRACKED, ON CERTAIN 345C EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE REACH STICK, IF CRACKED, ON CERTAIN 345C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REACH STICK, IF CRACKED, ON CERTAIN 330D AND 336D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE REACH STICK, IF CRACKED, ON CERTAIN 330D AND 336D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR MODIFICATIONS IN THE SWING PILOT CIRCUIT IN ORDER TO PREVENT SWING VIBRATION ON CERTAIN 345D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR MODIFICATIONS IN THE SWING PILOT CIRCUIT IN ORDER TO PREVENT SWING VIBRATION ON CERTAIN 345D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REPLACING, IF NECESSARY, THE FINAL DRIVE TRAVEL MOTOR GROUP ON CERTAIN 324DL, 324DLN, 325D, AND 325DL EXCAVATORS THAT ARE EQUIPPED FOR BIO OIL PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REPLACING, IF NECESSARY, THE FINAL DRIVE TRAVEL MOTOR GROUP ON CERTAIN 324DL, 324DLN, 325D, AND 325DL EXCAVATORS THAT ARE EQUIPPED FOR BIO OIL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MUFFLER ON CERTAIN 385 C L, 385C FS AND 385C MH EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE MUFFLER ON CERTAIN 385 C L, 385C FS AND 385C MH EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL COOLER CORE ON CERTAIN 324D, 325D, M325D, AND 329D HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL COOLER CORE ON CERTAIN 324D, 325D, M325D, AND 329D HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PIN ASSEMBLIES, PT3/PT5/PT6, ON CERTAIN 330D AND 336D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE PIN ASSEMBLIES, PT3/PT5/PT6, ON CERTAIN 330D AND 336D EXCAVATORS