Engine Oil Filter Base - Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 2P-8250 | Strap Wrench Assembly | 1 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Ensure that the O-ring seals are in position on the engine oil filter base. Put oil filter base (5) in position on the engine oil cooler and the cylinder block.
- Install bolts (6) that hold the engine oil filter base to the engine oil cooler.
- Install nuts (3) that hold the engine oil filter base to the engine oil cooler.
- Connect turbocharger oil line (4).
Show/hide table
Illustration 2 g00497217 Typical example - Install plug (1).
- Use Tool (A) to install oil filter (2).
- Check the engine oil level.
Show/hide table
Illustration 1 | g00497250 |
Typical example |
Note: Before assembly, check the condition of the O-ring seals. If the O-ring seals are worn or damaged, use new parts for replacement.
Caterpillar Information System:
3304B and 3306B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
3306B Industrial Engine Fuel System - Prime
3304B and 3306B Engines for Caterpillar Built Machines Flywheel - Install
3306B Industrial Engine Air Starting
3306B Industrial Engine Flywheel - Remove
3306C Engines for Caterpillar Built Machines Cylinder Block
3406E Truck Engine Alternator Mounting
3406E Truck Engines Front Housing and Covers
3406E Truck Engine Electrical System
3306B Industrial Engine Engine Oil Pan Plate - Remove and Install
3408C, 3412C and 3412D High Performance Marine Engines Flywheel Housing
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
3612 and 3616 Fast Vessel Engines Engine Oil Sample - Obtain
3406E Truck Engine Belt Tensioner
G3606 and G3608 Engines Governor Type
3306C Engines for Caterpillar Built Machines Piston Cooling Jet
3406E Truck Engines Accessory Drive
3412E and C30 Engines Cylinder Head
3304B and 3306B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
3406C (PEEC III) Truck Engine Flywheel
3306C Engines for Caterpillar Built Machines Connecting Rod Bearing Journal
3306C Engines for Caterpillar Built Machines Main Bearing Journal
3406E Truck Engines Air Inlet Elbow
Gas Engine Driven Chiller Driveline Product Information