Front Housing and Covers
Show/hide table
 | |
| Illustration 1 | g00496538 |
(1) Screw
- Tighten the screw to the following torque. ... 13 ± 3 N·m (10 ± 2 lb ft)
(2) Bolts
Apply 7M-7456 Compound to the threads before assembly.
Note: Tighten the bolts before tightening the capscrew.
Caterpillar Information System:
3406E Truck Engine Electrical System
3306B Industrial Engine Engine Oil Pan Plate - Remove and Install
3408C, 3412C and 3412D High Performance Marine Engines Flywheel Housing
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
3406E On-Highway Engine Engine Oil Cooler - Disassemble
3406E On-Highway Engine Engine Oil Filter Base - Remove
3406C (PEEC III) Truck Engine Piston and Rings
3612 and 3616 Fast Vessel Engines Daily Performance Log
3406C (PEEC III) Truck Engine Crankshaft
3406E Truck Engine Electronic Control System Components
3412E and C30 Engines Piston and Rings
3600 Heavy Fuel Engines Engine Speed Governing
3406E Truck Engine Alternator Mounting
3306C Engines for Caterpillar Built Machines Cylinder Block
3306B Industrial Engine Flywheel - Remove
3306B Industrial Engine Air Starting
3304B and 3306B Engines for Caterpillar Built Machines Flywheel - Install
3306B Industrial Engine Fuel System - Prime
3304B and 3306B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
3406E On-Highway Engine Engine Oil Filter Base - Install
3612 and 3616 Fast Vessel Engines Engine Oil Sample - Obtain
3406E Truck Engine Belt Tensioner
G3606 and G3608 Engines Governor Type
3306C Engines for Caterpillar Built Machines Piston Cooling Jet