Fuel Rack Controls
Show/hide table
Illustration 1 | g00491979 |
(1) Solenoid
- Tighten the solenoid to the following torque. ... 70 ± 10 N·m (51.6 ± 7.4 lb ft)
Note: Lubricate the O-ring seal lightly with glycerin.
(2) 1N-3801 Link Spring
- Length under test force ... 26.33 mm (1.037 inch)
- Test force ... 4.45 ± 0.22 N (1.000 ± .050 lb)
- Free length after test ... 49.29 mm (1.940 inch)
- Outside diameter ... 11.32 mm (0.446 inch)
- Test force ... 4.45 ± 0.22 N (1.000 ± .050 lb)
Show/hide table
Illustration 2 | g00516205 |
(3) Clearance between the camshaft retainer and the speed sensor ... 0.76 ± 0.15 mm (0.030 ± 0.006 inch)
Show/hide table
Illustration 3 | g00492000 |
(4) Nut
- Torque for the nut ... 55 ± 7 N·m (40.6 ± 5.2 lb ft)
(5) O-ring seal
Note: Lubricate the O-ring seal lightly with glycerin.
Caterpillar Information System:
3406C (PEEC III) Truck Engine Timing Position Sensor and Timing Solenoid (BTM)
3406C (PEEC III) Truck Engine Governor and Fuel Pump Drive
3306B Industrial Engine Fuel System
3306B Industrial Engine Gear Group (Front)
3406C (PEEC III) Truck Engine Manual Shutoff
G3612 and G3616 Engines Ignition System
Electronic Modular Control Panel II (EMCP II) for EUI Engines Service Record
G3612 and G3616 Engines Engine Supervisory System
3306B Industrial Engine Fuel Injection Lines
3306B Industrial Engine Alternator - Remove and Install
3306B Industrial Engine Electric Starting Motor - Remove and Install
3306B Industrial Engine Troubleshooting
3406E Truck Engines Engine Design
Electronic Modular Control Panel II (EMCP II) For MUI Engines General Information
3406E Truck Engine Valve Mechanism
Electronic Modular Control Panel II (EMCP II) General Information
3304B and 3306B Engines for Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install
3306B Industrial Engine Engine Description
G3612 and G3616 Engines Ignition System
3406E Truck Engines Engine Oil Pan
3406E Truck Engines Cylinder Liner
3406E Truck Engine BrakeSaver Engine Oil Filter Base
Installation of 7C-6208 Cylinder Sleeve {1222} Installation of 7C-6208 Cylinder Sleeve {1222}
Electronic Modular Control Panel II (EMCP II) For MUI Engines Connector Contact Identification of Generator Set Control