Fuel Ratio Control - Disassemble
解体步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件名称 | 数量 |
| A | FT-1820 | 夹具组件 | 1 |
| B | 1P-1855 | 挡圈钳 | 1 |
| C | 6V-9072 | 导杆 | 1 |
开始:
- 拆卸燃油比控制阀。 请参考解体与组装, "燃油比控制阀 - 拆卸"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 拆下盖 (1) 和 O 型密封圈 (2) 。
Show/hide table
 | |
| 图 1 | g00460737 |
- 为了释放弹簧力，将盖 (3) 保持在原位，并缓慢拆下将盖 (3) 固定到原位的两根螺栓。
Show/hide table
 |
弹簧加压的零件和/或盖板可能导致人身伤害。 拆卸盖板时弹簧力将被释放。 松动螺栓时做好准备把持住弹簧加载的盖板。 |
- 从挡圈 (7) 上拆下弹簧 (4) 、垫圈 (5) 和膜片 (6) 。 从壳体 (8) 上拆下挡圈 (7) 。
Show/hide table
 | |
| 图 2 | g00460791 |
- 从阀门延长杆 (12) 上拆下螺母 (13) ，然后从挡圈 (7) 上拆下阀门延长杆 (12) 。 从阀门延长杆 (12) 上拆下杆 (9) 。 从阀门延长杆 (12) 上拆下弹簧 (10) 和 O 形密封圈 (11) 。
Show/hide table
 | |
| 图 3 | g00460793 |
- 从壳体 (8) 上拆下弹簧 (14) 和挡圈 (15) 。
Show/hide table
 | |
| 图 4 | g00460795 |
- 应清洁和检查全部零件。 更换所有磨损或损坏的零件。
Caterpillar Information System:
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Install
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Remove
3306B Industrial Engine Fuel Injection Pump Housing and Governor - Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Filter
3126E and 3126B Commercial and Truck Engines Radiator Restrictions
3406E, C-10 and C-12 Truck Engines BrakeSaver
3406E, C-10, C-12, C-15, C-16 Truck Engines Engine Operation
P16, P20, P25, P28, P40 and P60 Pulverizer Additional Reference Material
C-18 Truck Engines Diagnostic Flash Code Retrieval
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Inlet Manifold
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Glow Plugs
3406E, C-10 and C-12 Truck Engines Gauges and Indicators
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Assemble
Air Conditioning and Heating R134a for All Caterpillar Machines Manifold Gauge Set (Refrigerant) - Remove
C-18 Truck Engines Reference Material
3208 Marine Engine Sea Water Strainer - Clean/Inspect
P16, P20, P25, P28, P40 and P60 Pulverizer Safety Messages
3304B and 3306B Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove
3304B and 3306B Engines for Caterpillar Built Machines Fuel Transfer Pump - Install
3126 Truck Engine (Military) Coolant Recommendations
3208 Marine Engine Oil Fumes Filter - Replace
3126E and 3126B Commercial and Truck Engines Cooling System Supplemental Coolant Additive (SCA) - Test/Add
3600 Distillate Fuel Engines Refill Capacities
3126 Truck Engine (Military) Commercial Heavy-Duty Coolant/Antifreeze and SCA