Fuel Transfer Pump - Install
安装步骤
- 安装 O 型密封圈和燃油输油泵 (3) 。 安装螺栓 (1) 和 (5) 。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
 | |
| 图 1 | g00462112 |
- 安装管组件 (2) 和管组件 (4) 。
- 将燃油供油管阀门转至 ON（接通）位置。
Caterpillar Information System:
3304B and 3306B Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove
P16, P20, P25, P28, P40 and P60 Pulverizer Safety Messages
3208 Marine Engine Sea Water Strainer - Clean/Inspect
C-18 Truck Engines Reference Material
Air Conditioning and Heating R134a for All Caterpillar Machines Manifold Gauge Set (Refrigerant) - Remove
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Assemble
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Install
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Remove
3306B Industrial Engine Fuel Injection Pump Housing and Governor - Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Filter
3126E and 3126B Commercial and Truck Engines Radiator Restrictions
3126 Truck Engine (Military) Coolant Recommendations
3208 Marine Engine Oil Fumes Filter - Replace
3126E and 3126B Commercial and Truck Engines Cooling System Supplemental Coolant Additive (SCA) - Test/Add
3600 Distillate Fuel Engines Refill Capacities
3126 Truck Engine (Military) Commercial Heavy-Duty Coolant/Antifreeze and SCA
3306C Truck Engine Engine Oil Filter Base - Remove
P16, P20, P25, P28, P40 and P60 Pulverizer Bushing (Crushing Arm) - Lubricate
3208 Marine Engine Governor Housing - Drain
P16, P20, P25, P28, P40 and P60 Pulverizer Plate Locations and Film Locations
3406E, C-10, C-12, C-15, C-16 Truck Engines Engine Description
3208 Marine Engine Fuel System Secondary Filter - Replace
3208 Marine Engine Engine Oil Level - Check