Oil Fumes Filter - Replace
Show/hide table
Illustration 1 | g00462947 |
(1) Hose clamp (2) Clip (3) Housing |
- Loosen hose clamp (1) . Remove the hose.
- Unfasten clips (2) . Remove the cover and the seal from housing (3) .
- Remove nuts (4) . Remove filter elements (5) from housing (3) . Discard the used elements.
Show/hide table
Illustration 2 | g00462957 |
(3) Housing (4) Nut (5) Filter element |
- Clean the inside of the filter housing with a clean cloth.
- Install new elements (5) and tighten nuts (4) .
- Clean the cover and the seal with a clean cloth. Inspect the condition of the seal. Replace the seal, if necessary.
- Install the seal and the cover. Fasten clips (2) .
- Install the hose. Tighten hose clamp (1) . Refer to the Operation and Maintenance Manual, "Torque Specifications" topic (Maintenance Section) for more information on the proper torques.
Caterpillar Information System:
3126 Truck Engine (Military) Coolant Recommendations
3304B and 3306B Engines for Caterpillar Built Machines Fuel Transfer Pump - Install
3304B and 3306B Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove
P16, P20, P25, P28, P40 and P60 Pulverizer Safety Messages
3208 Marine Engine Sea Water Strainer - Clean/Inspect
C-18 Truck Engines Reference Material
Air Conditioning and Heating R134a for All Caterpillar Machines Manifold Gauge Set (Refrigerant) - Remove
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Assemble
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Install
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Remove
3306B Industrial Engine Fuel Injection Pump Housing and Governor - Install
3126E and 3126B Commercial and Truck Engines Cooling System Supplemental Coolant Additive (SCA) - Test/Add
3600 Distillate Fuel Engines Refill Capacities
3126 Truck Engine (Military) Commercial Heavy-Duty Coolant/Antifreeze and SCA
3306C Truck Engine Engine Oil Filter Base - Remove
P16, P20, P25, P28, P40 and P60 Pulverizer Bushing (Crushing Arm) - Lubricate
3208 Marine Engine Governor Housing - Drain
P16, P20, P25, P28, P40 and P60 Pulverizer Plate Locations and Film Locations
3406E, C-10, C-12, C-15, C-16 Truck Engines Engine Description
3208 Marine Engine Fuel System Secondary Filter - Replace
3208 Marine Engine Engine Oil Level - Check
P16, P20, P25, P28, P40 and P60 Pulverizer Ring Gear - Lubricate
3208 Marine Engine Fuel Ratio Control - Inspect/Adjust