3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Caterpillar


Engine Oil Filter

Usage:

CB-214D 1TZ
When the oil filter is installed, place a thin film of clean engine oil on the face of the gasket.

Tighten the oil filter firmly with your hand.




Illustration 1g00459807

Oil filter with bypass valve

(1) Cylinder block

(2) Oil filter

(3) Bypass valve

Pressure to open bypass valve ... 69 ± 14 kPa (10 ± 2 psi)

(A) Engine oil flow from the oil pump to the oil filter

(B) Engine oil flow from the oil filter

(C) Engine oil flow around an open bypass valve

Caterpillar Information System:

3126E and 3126B Commercial and Truck Engines Radiator Restrictions
3406E, C-10 and C-12 Truck Engines BrakeSaver
3406E, C-10, C-12, C-15, C-16 Truck Engines Engine Operation
P16, P20, P25, P28, P40 and P60 Pulverizer Additional Reference Material
C-18 Truck Engines Diagnostic Flash Code Retrieval
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Inlet Manifold
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Glow Plugs
3406E, C-10 and C-12 Truck Engines Gauges and Indicators
3208 Marine Engine Overhaul Considerations
3306B Industrial Engine Fuel Injection Pump Housing - Assemble
3208 Marine Engine Crankshaft Vibration Damper - Inspect
3306B Industrial Engine Fuel Injection Pump Housing - Disassemble
3306B Industrial Engine Fuel Injection Pump Housing and Governor - Install
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Remove
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Install
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Assemble
Air Conditioning and Heating R134a for All Caterpillar Machines Manifold Gauge Set (Refrigerant) - Remove
C-18 Truck Engines Reference Material
3208 Marine Engine Sea Water Strainer - Clean/Inspect
P16, P20, P25, P28, P40 and P60 Pulverizer Safety Messages
3304B and 3306B Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove
3304B and 3306B Engines for Caterpillar Built Machines Fuel Transfer Pump - Install
3126 Truck Engine (Military) Coolant Recommendations
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.