Inlet Manifold
3003 Engine
The inlet manifold and the valve mechanism cover on the 3003 engine are the same part. Refer to the Specifications Module, "Valve Mechanism Cover" topic for additional information.
3013, 3014, and 3024 Engines
Show/hide table
 | |
| Illustration 1 | g00456676 |
Inlet manifold and components for installation | |
(1) Mounting bolts
- The 3013 engine has two long bolts and four shorter bolts. Tighten the mounting bolts to the following torque. ... 10 N·m (90 lb in)
- The 3014 and 3024 engines have two long bolts and six shorter bolts. Tighten the mounting bolts to the following torque. ... 14 N·m (10 lb ft)
Note: Two different lengths of bolts are used. Be sure that the correct length of bolt is installed in the holes.
(2) Washer
(3) Inlet manifold
(4) Roll pin
(5) Gasket
(6) Spacer plate
(7) Gasket
(8) Cylinder head
Caterpillar Information System:
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Glow Plugs
3406E, C-10 and C-12 Truck Engines Gauges and Indicators
3208 Marine Engine Overhaul Considerations
3306B Industrial Engine Fuel Injection Pump Housing - Assemble
3208 Marine Engine Crankshaft Vibration Damper - Inspect
3306B Industrial Engine Fuel Injection Pump Housing - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines Fuel Injection Pump - Install
Alignment Of The Close Coupled Two-Bearing Generators {4450} Alignment Of The Close Coupled Two-Bearing Generators {4450}
3208 Marine Engine Reference Material
3304B and 3306B Engines for Caterpillar Built Machines Fuel Injection Pump - Assemble
3304B and 3306B Engines for Caterpillar Built Machines Fuel Injection Pump - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines Fuel Injection Pump - Remove
C-18 Truck Engines Diagnostic Flash Code Retrieval
P16, P20, P25, P28, P40 and P60 Pulverizer Additional Reference Material
3406E, C-10, C-12, C-15, C-16 Truck Engines Engine Operation
3406E, C-10 and C-12 Truck Engines BrakeSaver
3126E and 3126B Commercial and Truck Engines Radiator Restrictions
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Filter
3306B Industrial Engine Fuel Injection Pump Housing and Governor - Install
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Remove
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Install
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Assemble
Air Conditioning and Heating R134a for All Caterpillar Machines Manifold Gauge Set (Refrigerant) - Remove