Removal Procedure
Start By:
- Drain the coolant from the cooling system.
Show/hide table
|
| NOTICE |
|---|
|
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life. |
|
Show/hide table
|
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.
Dispose of all fluids according to local regulations and mandates. |
|
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Cap all lines, all hoses, and all tubes and plug all lines, all hoses, and all tubes. This will help to prevent fluid loss and will help to keep contaminants from entering the system.
Show/hide table
|
|
|
| Illustration 1 | g06109804 |
Show/hide table
|
|
|
| Illustration 2 | g06109805 |
Show/hide table
|
|
|
| Illustration 3 | g06109806 |
Show/hide table
|
|
|
| Illustration 4 | g06187477 |
Show/hide table
|
|
|
| Illustration 5 | g06187491 |
Show/hide table
|
|
|
| Illustration 6 | g06187481 |
Installation Procedure
- Install the engine oil cooler in the reverse order of removal.
