Water Pump
Show/hide table
Illustration 1 | g00340512 |
Typical example |
(1) Oil seal
Do not lubricate the seal lip. Assemble the seal lip with the lip toward the bearings. (See Detail A.)
(2) Water seal and ring
- Put water on the seal.
- Use the 135-7629 Seal Installer to install the seal and the ring together in the housing bore with the shiny face of the ceramic ring toward the carbon seal.
(3) Seal assembly
- Remove the spring from the seal.
- Put clean water inside the seal assembly.
- Use the 135-7629 Seal Installer and hand pressure to install the seal assembly on the shaft until the carbon face lightly contacts the shiny face of the ceramic ring.
- Install the spring.
(4) Torque for the bolt that holds the impeller ... 47 ± 9 N·m (35 ± 7 lb ft)
(5) Torque for the bolt that holds the gear ... 97 ± 7 N·m (72 ± 5 lb ft)
Caterpillar Information System:
3618 Engine Safety Messages
322B, 322B L, 325B and 325B L Excavators Shear Operation - If Equipped
3618 Engine Sensors and Electrical Components
3618 Engine Engine Power Ratings
G3612 and G3616 Engines General Information (Air Starting System)
3306C Truck Engine Flywheel
3618 Engine Alarms and Shutoffs
3618 Engine Gauges and Indicators
3306C Truck Engine Flywheel
3618 Engine Starting the Engine
3618 Engine After Starting Engine
3306C Truck Engine Flywheel
Oil Renewal System Electronic Control System
3306C Truck Engine Valve Rocker Arms and Lifters
3412 Generator Set Engines Engine Design
Schedules For The On-Fuel Injection Test Stand{0782, 1264} Schedules For The On-Fuel Injection Test Stand{0782, 1264}
3306C Truck Engine Cylinder Head Valves
3408E and 3412E Engines for Caterpillar Built Machines Fuel Filter Base
3412 Generator Set Engines Magnetic Pickup
3306B Industrial Engine Before Starting Engine
3176C and 3196 Industrial Engines Overhaul Considerations
793B Off-Highway Truck Tire Inflation - Check
3408C, 3412C and 3412D High Performance Marine Engines Valve Mechanism Cover
3412 Generator Set Engines Vibration Damper and Pulley