Valve Mechanism Cover
Show/hide table
Illustration 1 | g01016004 |
Valve mechanism cover for the 3408 and 3412 Typical example |
(1) Tighten the bolts for the valve cover base to the following torque. ... 14 ± 4 N·m (124 ± 35 lb in)
(2) Tighten the bolts for the valve cover to the following torque. ... 14 ± 4 N·m (124 ± 35 lb in)
(3) Cut the seal for valve cover base to the following length. ... 1625 ± 5 mm (64.0 ± 0.2 inch)
(4) Cut the seal for the valve cover to the following length. ... 1410 ± 5 mm (55.5 ± 0.2 inch)
Coat both ends of the seals with 3S-6252 Sealant prior to installation.
Caterpillar Information System:
793B Off-Highway Truck Tire Inflation - Check
3176C and 3196 Industrial Engines Overhaul Considerations
3306B Industrial Engine Before Starting Engine
3412 Generator Set Engines Magnetic Pickup
3408E and 3412E Engines for Caterpillar Built Machines Fuel Filter Base
3306C Truck Engine Cylinder Head Valves
Schedules For The On-Fuel Injection Test Stand{0782, 1264} Schedules For The On-Fuel Injection Test Stand{0782, 1264}
3412 Generator Set Engines Engine Design
3306C Truck Engine Valve Rocker Arms and Lifters
Oil Renewal System Electronic Control System
3306C Truck Engine Water Pump
3618 Engine Safety Messages
3412 Generator Set Engines Vibration Damper and Pulley
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Expansion Valve System
TK711, TK721, TK722 and TK732 Track Feller Bunchers Track Adjustment - Inspect
G3612 and G3616 Engines General Information (Cooling System)
3500 Generator Set Engines Engine Oil Filter Base
3412 Generator Set Engines Water Pump
3306C Engines for Caterpillar Built Machines Camshaft
3306C Engines for Caterpillar Built Machines Camshaft Bearings
3406C Engines for Caterpillar Built Machines Water Temperature Regulator
G3500 Engines Crankcase Blowby - Measure/Record
3412 Generator Set Engines Cylinder Head
3412C Engine Glossary of Electronic Control Terms