C4.4 Engines Caterpillar


Engine Shutdown Occurs Intermittently

Usage:

AP500F 449
注: 只有在操作过程中发动机完全停机的情况下才能使用本步骤。

可能原因

  • 现行代码和记录的代码

  • 电气连接

  • 燃油供应不稳定

  • 开关

  • 电路保护

  • 发动机转速/正时

表 1
相关的诊断故障代码    
J1939 代码     CDL 代码    
3719-0     E995(3)    
3719-16     E995(2)    
5246-0     E1389(3)    

建议的措施

注: 下面以概率的先后顺序列出了这些步骤。 依次完成这些步骤。

表 2
故障诊断与排除测试步骤     数值     结果    

1. 现行代码和记录的代码

A. 某些诊断代码和/或事件代码可能会造成发动机停机。 连接电子维修工具,检查有无激活的代码和记录的代码。

B. 使用电子维修工具检查有无相关故障诊断代码。 请参考表 1
   

代码
   

结果:有相关激活或记录的诊断故障代码。

修理:在继续本步骤之前,对任何激活或记录的相关故障诊断代码进行故障排除。

结果:没有相关激活或记录的诊断故障代码。

转至测试步骤 2。
   

2. 电气连接

A. 检查 ECM J1/P1 和 J2/P2 接头的安装是否正确。 检查喷油器接头的安装是否正确。
   

接头
   

结果:存在可疑接头。

修理:在电子维修工具上执行"晃动测试"。

修理或更换可疑接头。

结果:没有可疑接头。

转至测试步骤 3。
   

3. 电气连接

A. 检查 ECM 的电源和接地连接。 请参阅故障诊断与排除, "电源 - 测试"。
   

电气接头
   

结果:电气接头正常。

继续测试步骤 4。

结果:电气接头不正常。

修理:修理或更换损坏的接头。 确认修理后故障排除。
   

4. 燃油供应不稳定

A. 检查燃油系统。 参考系统操作/测试和调整, "燃油系统 - 检查",以了解更多信息。

寒冷天气会对燃油特性带来不利影响。 有关更多信息,请参阅发动机操作和保养手册, "寒冷天气操作"。

B. 检查燃油质量。 检查燃油箱中有无可能会堵塞燃油供应的碎屑或异物。
   

燃油
   

结果:燃油质量正常。

继续测试步骤 5。

结果:燃油质量不良。

修理:更换燃油。 确认修理后故障排除。
   

5. 开关

A. 检查至 ECM 的钥匙开关输入。

B. 检查所有发动机停机开关及相关配线。
   

开关
   

结果:停机开关和配线正常。

转至测试步骤 6。

结果:停机开关和配线不正常。

修理:进行必要修理,并确认通过修理排除了故障。
   

6. 电路保护

A. 检查所有发动机电路保护装置的导线和接头。

B. 检查电路保护装置。
   

电路保护
   

结果:电路保护装置跳闸。

修理:如果断路器跳闸,复位断路器。 如有必要,更换熔断的保险丝。 在将发动机重新投入使用前,确定导致断路器跳闸或保险丝熔断的状况。 进行必要的修理。

结果:电路保护装置正常。

转至测试步骤 7。
   

8. 发动机转速/正时传感器

A. 检查发动机转速/正时传感器的接头。

B. 盘动发动机。 如果发动机起动且没有记录转速正时代码,则转速正时电路工作正常。
   

转速/正时
   

结果:转速/正时传感器电路工作异常。

修理:测试转速/正时电路。 请参阅故障诊断与排除, "转速/正时 - 测试"。 确认修理后故障排除。

如果故障仍然存在,请联系代理商解决方案网络 (DSN)。
   

Caterpillar Information System:

C4.4 and C6.6 Engines Engine Shutdown Occurrence
C4.4 and C6.6 Engines Engine Overspeeds
2014/12/18 New Alternator Mounting Groups Are Now Used on Certain C18 Machine Engines {1405, 1802}
C4.4 Engines Engine Misfires, Runs Rough or Is Unstable
PL83 and PL87 Pipelayers Engine Crankcase Breather - Clean
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Main Control Valve and Mounting
C4.4 Engines Engine Cranks but Does Not Start
C4.4 Engines Diesel Particulate Filter Temperature Is Low - If Equipped
C4.4 Engines Diesel Particulate Filter Collects Excessive Soot - If Equipped
C4.4 Engines Diesel Oxidation Catalyst Has Incorrect Inlet Temperature
C4.4 Engines DEF Tank Temperature Is Low
C4.4 Engines DEF Tank Temperature Is High
M318F, M320F and M322F Wheeled Excavators Machine System Specifications Main Hydraulic Pump
2015/06/23 Cat® Reman Announces Additional Engine Options for Certain Cat Machine Applications {1000}
PL83 and PL87 Pipelayers Engine Air Precleaner - Clean
2015/06/01 Cat® Reman Now Offers Additional Short Blocks for Certain Machine Engines {1000}
Procedure to Install the Working at Heights Retrofit Kit on the 785C and 785D Off-Highway Trucks{0635, 0679, 5057, 6922, 7051, 7255, 7256, 7509} Procedure to Install the Working at Heights Retrofit Kit on the 785C and 785D Off-Highway Trucks{0635, 0679, 5057, 6922, 7051, 7255, 7256, 7509}
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Pilot Pressure - Test and Adjust
C4.4 and C6.6 Engines Engine Stalls at Low RPM
C4.4 Engines Engine Top Speed Is Not Obtained
C4.4 Engines Engine Vibration Is Excessive
C4.4 Engines Exhaust Has Excessive Black Smoke
C4.4 Engines Exhaust Has Excessive White Smoke
785G Off-Highway Truck Systems Torque Converter
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.