CW14 Pneumatic Compactor Caterpillar


Maintenance Interval Schedule

Usage:

CW-14 LTJ
Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed.

The user is responsible for the performance of maintenance. All adjustments, the use of proper lubricants, fluids, filters, and the replacement of components due to normal wear and aging are included. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components.

Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, in order to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance. Refer to the maintenance procedure for any other exceptions that may change the maintenance intervals.

Note: The aftertreatment system can be expected to function properly for the useful life of the engine (emissions durability period), as defined by regulation. All prescribed maintenance requirements must be followed.

Note: Before each consecutive interval is performed, all maintenance from the previous interval must be performed.

Note: If Cat HYDO Advanced hydraulic oils are used, the hydraulic oil change interval may be extended substantially. S·O·S services may extend the oil change even longer. Consult your Cat dealer for details.

When Required

Ballast - Remove/Install
Battery - Recycle
Battery or Battery Cable - Inspect/Replace
Circuit Breakers - Reset
Engine Air Filter Primary Element - Clean/Replace
Engine Air Filter Secondary Element - Replace
Engine Compartment - Clean
Film (Product Identification) - Clean
Fuel System - Prime
Fuses - Replace
Oil Filter - Inspect
Tire Mat - Replace
Tire Scraper - Inspect/Adjust/Replace
Water Spray Nozzles - Clean
Water Spray System - Drain
Wheel Nuts - Tighten

Every 6000 Service Hours or 3 Years

Cooling System Coolant Extender (ELC) - Add

Every 12 000 Service Hours or 6 Years

Cooling System Coolant (ELC) - Change

Every 10 Service Hours or Daily

Backup Alarm - Test
Cooling System Coolant Level - Check
Engine Air Filter Service Indicator - Inspect
Engine Oil Level - Check
Hydraulic System Oil Level - Check
Indicators and Gauges - Test
Neutral Start Switch - Test
Seat Belt - Inspect
Water Spray System Filter - Clean
Water Tank Strainer - Clean and Inspect

Every 50 Service Hours or Weekly

Tire Inflation - Check
Wheel Bearings (Front) - Lubricate

Every 100 Service Hours or 2 Weeks

Fuel System Water Separator - Drain

Every 100 Service Hours or Monthly

Fuel Tank Water and Sediment - Drain

Initial 250 Service Hours

Strainer (Flushing System) - Clean

Every 250 Service Hours

Cooling System Coolant Sample (Level 1) - Obtain

Every 250 Service Hours or Monthly

Oscillating and Steering Bar - Lubricate
Steering Cylinder Ends - Lubricate

Every 250 Service Hours or 3 Months

Belts - Inspect/Adjust/Replace
Engine Oil Sample - Obtain

Every 500 Service Hours

Fuel Tank Strainer - Clean
Strainer (Flushing System) - Clean

Every 500 Service Hours or 6 Months

Braking System - Test
Drive Shaft - Lubricate
Engine Oil and Filter - Change
Fuel System Secondary Filter - Replace
Fuel System Water Separator Element - Replace
Hydraulic System Oil Sample - Obtain

Every 500 Service Hours or 1 Year

Radiator and Hydraulic Oil Cooler - Clean

Every 1000 Service Hours or 1 Year

Battery - Clean/Check
Hydraulic System Oil Filter - Replace
Hydraulic Tank Breather - Replace
Hydraulic Tank Strainer - Clean
Rollover Protective Structure (ROPS) - Inspect

Every 2000 Service Hours

Fuel Tank Cap Filter - Replace

Every Year

Cooling System Coolant Sample (Level 2) - Obtain

Every 3000 Service Hours

Diesel Particulate Filter - Clean
Oxygen Sensor - Replace

Every 3000 Service Hours or 18 Months

Hydraulic System Oil - Change

Every 3 Years

Seat Belt - Replace

Caterpillar Information System:

Cat MT4400D AC Off-Highway Truck Advisor Monitoring System System Schematic
CB22B, CB24B, CB32B and CC24B Vibratory Utility Compactors Machine Systems Spray Bar
CB22B, CB24B, CB32B and CC24B Vibratory Utility Compactors Machine Systems Air Cleaner
CB36B Asphalt Compactor and CB34B, CB34B XW and CC34B Vibratory Utility Compactors Machine Systems Air Cleaner
2014/07/07 Operator Station Components Now Available for Certain Underground Articulated Trucks and Load Haul Dump Machines {7301}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703} 188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057} Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
C15 and C18 Engines for Caterpillar Built Machines System Overview
C15 and C18 Engines for Caterpillar Built Machines Service Information Report
C15 and C18 Engines for Caterpillar Built Machines Electronic Service Tools
C15 and C18 Engines for Caterpillar Built Machines Welding Precaution
C15 and C18 Engines for Caterpillar Built Machines General Information
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) Configuration Screen - System Information
Cat MT4400D AC Off-Highway Truck Advisor Monitoring System Monitoring System
Cat MT4400D AC Off-Highway Truck Advisor Monitoring System General Information
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) Diagnostic Summary Screen
Cat MT4400D AC Off-Highway Truck Advisor Monitoring System Warning Operation
Cat MT4400D AC Off-Highway Truck Advisor Monitoring System Output Components
Cat MT4400D AC Off-Highway Truck Advisor Monitoring System Input Components
Cat MT4400D AC Off-Highway Truck Advisor Monitoring System Display Module
795F AC and 795F AC XQ Off-Highway Trucks Hood Tilt Assist Spring - Lubricate
Cat MT4400D AC Off-Highway Truck Advisor Monitoring System Diagnostic Operation
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) Object Detection Sensor - Inspect/Adjust
C15 and C18 Engines for Caterpillar Built Machines Component Location
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.