Oil Filter Housing
Usage:
Remove Oil Filter Housing
1. Drain the oil filter housing.
2. Disconnect oil inlet line (1) from filter housing.
3. Disconnect oil outlet line (2) from housing.
4. Attach a hoist to the oil filter housing.
5. Remove the filter housing mounting bolts (3).
6. Remove oil filter housing - weight 70 lbs. (32 kg).
Install Oil Filter Housing
1. Attach a hoist and position oil filter housing on engine. Install four mounting bolts.
2. Connect oil outlet line to filter housing.
3. Connect oil inlet line to filter housing.
4. Check the oil level in crankcase and fill as necessary.
Caterpillar Information System:
D346 INDUSTRIAL ENGINE Fuel Filter Housing
D346 INDUSTRIAL ENGINE Water Temperature Regulators
D346 INDUSTRIAL ENGINE Fuel Priming Pump
D346 INDUSTRIAL ENGINE Piston Cooling Jets
D346 INDUSTRIAL ENGINE Crankshaft Main Bearings
D346 INDUSTRIAL ENGINE Oil Pump
D346 INDUSTRIAL ENGINE Oil Pan Base
D346 INDUSTRIAL ENGINE Connecting Rod Bearings
D346 INDUSTRIAL ENGINE Engine Oil Cooler
D346 INDUSTRIAL ENGINE Oil Cooler Bypass Valve
G333C ENGINE Alternator Regulator
G333C ENGINE Alternator
D346 INDUSTRIAL ENGINE Alternator
D346 INDUSTRIAL ENGINE Vibration Damper And Hub
D346 INDUSTRIAL ENGINE Crankshaft Front Seal
D346 INDUSTRIAL ENGINE Front Timing Gear Cover
D346 INDUSTRIAL ENGINE Front Balancer And Idler Gear
D346 INDUSTRIAL ENGINE Front Timing Gear Plate And Camshaft Drive Idler Gear
D346 INDUSTRIAL ENGINE Fuel Transfer Pump
D346 INDUSTRIAL ENGINE Fuel Injection Lines
D346 INDUSTRIAL ENGINE Safety Shutoff Control
D346 INDUSTRIAL ENGINE Fuel Ratio Control With Override
D346 INDUSTRIAL ENGINE Governor
D346 INDUSTRIAL ENGINE Variable Timing Unit